Final KR Based Race Bike Project

[Luders]

I'm having my own rearsets made up Bernie.

The ground clearance is not enough to use one of these stands, so I guess it's just to save a bit more weight, or cosmetic.

You could make a custom stand to suit pretty easily though.

[Luders]

Working on the carburettors at the moment and suitable mountings

[500bernie]

Hi Ben,
Did you make the mounting plates or are they a modified one from another bike?
Cheers
Bernie

[Luders]

I'm making them up myself using alluminium plate and these rubbers.

[500bernie]

They look good Ben =D> =D> =D>

[Luders]

Kev had a problem with his 35mm carb rubbers, so I gave him mine. This presented an oportunity for me to go off piste with my carb choice and go for something more modern than the old PWK35's.

These Mikuni's as you can see have TPS and powerjets, so I can make full use of the trick Zeeltronic electrics this bike will have installed.

[500bernie]

That will be interesting to see how you get on with them

[Luders]

That will be interesting to see how you get on with them

The proof with be in the dyno chart, that's what everyone wants to see

[maccas]

Carbs look good Ben.

Just a quick point regarding the electronic powerjets. With no power applied the powerjet is OPEN. When you apply 12V they are then CLOSED. Just incase you weren't aware that is all.

In the zeeltronic software ON will mean the powerjet is CLOSED. Or if using the duty cycle setting, 100% will be powerjet CLOSED.

Dan

[Luders]

Thanks for the tip Dan and BTW, I been a bone head and managed to lose a load of my contact numbers and yours was one that went.

[maccas]

No worries mate, just sent you a PM.

Dan

[500bernie]

Hi Dan,

Were you running PJs on yours?

Cheers,
Bernie

[maccas]

Hi Bernie,

I bought a pair of pwk36 carbs with electronic powerjets but then changed my mind about fitting them.

I run electronic pj's on my 3xv though

Dan

[500bernie]

Hi Dan,
I had Lectrons on the H1 but they were a pain to set up.
What are you playing with at the moment (bike wise)

[maccas]

Erm well the 3xv spun a ring at cadwell in May which made quite an expensive mess, still gradually rebuilding the engine.

Then i have stepped over to the dark side and bought an fzr400rr so i always have something to use on track
Dan