Final KR Based Race Bike Project

jarno · Post by **jarno** » Tue Jan 21, 2014 3:25 pm

looking great ben =D> =D>

can't wait to see it finnished.

Luders · Post by **Luders** » Wed Jan 22, 2014 12:43 pm

Cheers Jarno, neither can I

Post by **500bernie** » Wed Jan 22, 2014 1:06 pm

Looking Good Ben =D> =D> =D>

Top-shaggy · Post by **Top-shaggy** » Thu Jan 23, 2014 12:26 am

Oooh that looks like it means business .. Good stuff !

fred · Post by **fred** » Thu Jan 23, 2014 2:13 am

spot on ,ben you have a realy good eye on lines n that ,whens it at cadwell ?

Luders · Post by **Luders** » Thu Jan 23, 2014 3:21 pm

Not sure yet Fred, I should be making an appearance around August time at Cadwell

Luders · Post by **Luders** » Sat Jan 25, 2014 4:32 pm

Managed to get a few more jobs done today.

Fitted the chain DID 520 ERS, the clutch lever and run switch. I've also cleaned off the old paint on the front fender and stripped it back to the white gel coat. I'm going to polish it up and take a mould from it, to create some new ones out of carbon fibre.

I was also having a dig around in my shed and found some old custom rearsets MJ gave me a few years back. They are set too far back for me to use as they are, but I am going to use them as templates and get them machined to suit.

Post by **500bernie** » Sat Jan 25, 2014 4:43 pm

That looks like it is coming along great now Ben

How about a close up of the Technoflex in the braced swinger?

Luders · Post by **Luders** » Sat Jan 25, 2014 4:50 pm

Is this what you're after, or did you want one more from the side?

Post by **500bernie** » Sat Jan 25, 2014 4:52 pm

Very nice

=D> =D> =D>

Luders · Post by **Luders** » Sat Jan 25, 2014 4:58 pm

Luders · Post by **Luders** » Wed Jan 29, 2014 12:44 pm

I've put the gear selector cover on and first part of the shifting mechanism.

This lovely piece of machined ally was made for me by a chap on the forum called Ronnie and if anyone is interested in having one made for their race or track bike, either drop me a PM and I'll give you his email address, alternatively PM him directly, here's his thread on them.

viewtopic.php?f=2&t=9650&hilit=rearsets

scooble · Post by **scooble** » Wed Jan 29, 2014 1:52 pm

I did the same on my KR - it worked really well

Post by **500bernie** » Wed Jan 29, 2014 8:29 pm

Hi Ben,
What rearsets are you using?

KR-1R · Post by **KR-1R** » Wed Jan 29, 2014 9:45 pm

is the spare hole in the plate for a MX style triangle prop stand or just to remove material?

KR-1S.co.uk Forum

Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project

Re: Final KR Based Race Bike Project