here is my project
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
- tescr500
- Oil Injector
- Posts: 742
- Joined: Sat Aug 29, 2009 12:05 pm
- Location: hampshire
Re: here is my project
Hi Bernie, nice to be finally doing a bit to the ole girl. What finish is what Bernie?. Well the first finish factory well weathered over 24 years . The grey look has been shot with glass beads, just a spray pot type blaster. Final finish was brown cutting polish, then blue, the meguiars All Metal Polish then a good rub over with a microfiber blue cloth cheers Bernie.
Hi 375, funny you should say that, because I didn't even know the centre's were ally, just never payed much attention to it really till the other day, anodize gives it away I suppose cheers 375.
Hi 375, funny you should say that, because I didn't even know the centre's were ally, just never payed much attention to it really till the other day, anodize gives it away I suppose cheers 375.
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: here is my project
WOW....
What a surprise, I thought they were steel, so I assumed it was hard chrome.
Well done.
Just finished polishing my bottom yoke.....what a bitch
What a surprise, I thought they were steel, so I assumed it was hard chrome.
Well done.
Just finished polishing my bottom yoke.....what a bitch
Firecracker Red and Grey C3 300
-
- Premix Junkie
- Posts: 1305
- Joined: Fri Apr 18, 2008 9:41 pm
- Location: Essex. Depeche Mode, Town
Re: here is my project
I think you pair of blingers were separated at birth,
Ernest borgnine.
Best film, The Vikings
Best film, The Vikings
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: here is my project
Only one difference .........375 wrote:I think you pair of blingers were separated at birth,
Wayne has finished his bike and I am still p#ssing about
Firecracker Red and Grey C3 300
- tescr500
- Oil Injector
- Posts: 742
- Joined: Sat Aug 29, 2009 12:05 pm
- Location: hampshire
Re: here is my project
nearly Bernie nearly, but how many other people never new that, how strange. sorry for late reply but the super information highway was down for nearly 2 days, thought my throat had been cut. Brake callipers black or shinny ones have not made mind up yet
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: here is my project
Hi Wayne,
Martin has a set of Anthracite metalic ones that look out of this world
Was seriously interested until he sorted me out with a set of the correct grey ones
Martin has a set of Anthracite metalic ones that look out of this world
Was seriously interested until he sorted me out with a set of the correct grey ones
Firecracker Red and Grey C3 300
- tescr500
- Oil Injector
- Posts: 742
- Joined: Sat Aug 29, 2009 12:05 pm
- Location: hampshire
Re: here is my project
Hi Bernie mine with either be polished or jet gloss black, I'll polish first, if don't like I'll do them black, I'LL POST CALIPER ON BIKE SOON CHEERS
sorry for the size
sorry for the size
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
Re: here is my project
This must be te only forum i have to view on a 60" plasma!
Last edited by Binetta Steve on Sun Jun 30, 2013 3:28 pm, edited 1 time in total.
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: here is my project
Hi Wayne,
Never appologise coz its a bit on the big side
I would draw file all the surfaces to make them flat and remove all the sand cast marks before polishing
Never appologise coz its a bit on the big side
I would draw file all the surfaces to make them flat and remove all the sand cast marks before polishing
Firecracker Red and Grey C3 300
- tescr500
- Oil Injector
- Posts: 742
- Joined: Sat Aug 29, 2009 12:05 pm
- Location: hampshire
Re: here is my project
yeah might have a crack at that but I might just polish to a shine with casting marks mm
o naturel lol
o naturel lol
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
- tescr500
- Oil Injector
- Posts: 742
- Joined: Sat Aug 29, 2009 12:05 pm
- Location: hampshire
Re: here is my project
well that's the tank done, now the fairing top half.
How are we all by the way.
How are we all by the way.
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: here is my project
Nice job Wayne =D> =D> =D>
(Get that rabbit in a nice casserole)
Have you finished with the calipers ?
Cheers
Bernie
(Get that rabbit in a nice casserole)
Have you finished with the calipers ?
Cheers
Bernie
Firecracker Red and Grey C3 300
-
- Oil Injector
- Posts: 706
- Joined: Sat Aug 08, 2009 9:29 pm
- Location: the netherlands
Re: here is my project
looking very nice.
why did you choose kr1s colours insted of kr1 colours?
why did you choose kr1s colours insted of kr1 colours?
Kr1s C1 zeus blue
Kr1s c2 black green
ZXR400 SP
ZXR250A
Kr1s c2 black green
ZXR400 SP
ZXR250A
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
Re: here is my project
That looks stunning!