here is my project

375 · Post by **375** » Sat Jan 14, 2012 5:40 pm

Cheers 375 patina has many meanings but all points in the general direction i catch your drift, and the fairing needs a bit of tlc as i broke it but not a problem though, and i have had my hair styled to the over 40 look

The over 40 hair style

i do have a fringe that is starting to work its way back to my neck.

You have done a fine job =D>

tescr500 · Post by **tescr500** » Sat Jan 14, 2012 5:48 pm

i've enjoyed the bits i have polished but glad the main of it is powder coated. just about to finish my spraying off, just doing all the prep work, wheels, rear seat and i'm going to do a spare tank for now i've got, has a dent but going to fill and see what it comes out like, i have got a good tank but waiting for the key which will arrive soon, not sure if i'll get any spraying done but prep work will be cheers.

Post by **500bernie** » Sat Jan 14, 2012 6:44 pm

Hi Wayne,

I am still enjoying the project (otherwise it would be on flebay), makes me smile when I take the cover off it.
I always wanted a bike with an alloy frame so that I could polish it ......... just didn't reckon on it taking this long to get it, so I am not in any rush (having waited over 25 years) .

Cheers
Bernie

tescr500 · Post by **tescr500** » Sat Jan 14, 2012 7:12 pm

yeah bernie it takes time time time time time time time

Howie · Post by **Howie** » Mon Jan 30, 2012 10:06 pm

Hi Wayne,

I'm hoping to start the re-spraying on my bike in the next couple of weeks.

I have been reading & re-reading this post & most of the other posts (John-b =D> ) regarding paint application.

I've got the paint/thinners/activator etc, any more tips? Before I start?

I think I've done my prep ok? But anymore advice is sorely appreciated...

tescr500 · Post by **tescr500** » Mon Jan 30, 2012 10:49 pm

Hi Howie, i think i just about covered it all, but only don't panic with runs just leave to dry rub out later, and make sure surface clean but you will get bits of dirt floating unless you have a dust free enviroment, but any questions or problems just give me a shout cheers Wayne.

Howie · Post by **Howie** » Tue Jan 31, 2012 1:00 am

Cheers Wayne,

Appreciate any help & advice

tescr500 · Post by **tescr500** » Sun Feb 19, 2012 12:01 pm

i'll try not to be so clumsy fairing repair done ready for spraying

http://www.youtube.com/watch?v=njaFF8_xVzA

tescr500 · Post by **tescr500** » Sat Apr 21, 2012 8:54 am

nice wheel photo is massive f..k knows what went on there

tescr500 · Post by **tescr500** » Wed May 29, 2013 11:07 pm

did 1 exhaust at the weekend and gave her a run. listen care fully at the end, but not all is as it seems.

http://www.youtube.com/watch?v=U7xxQlLpulY

headcoats · Post by **headcoats** » Thu May 30, 2013 9:28 am

Is the oil pump working

The end can doesn't look like it has burnt oil inside it

tescr500 · Post by **tescr500** » Thu May 30, 2013 8:35 pm

It's fine it did it to me before, the fly wheel bolt came loose cheers.

tescr500 · Post by **tescr500** » Tue Jun 25, 2013 12:08 am

Hi all, how is everybody, here is a before and after of my rescued front discs,

Post by **500bernie** » Tue Jun 25, 2013 7:52 am

Very nice Wayne

I like shiney =D> =D>

375 · Post by **375** » Tue Jun 25, 2013 1:43 pm

Not seen that before

KR-1S.co.uk Forum

here is my project

Re: here is my project

Re: here is my project

Re: here is my project

Re: here is my project

Re: here is my project

Re: here is my project