KR-1S.co.uk Forum

Posted: **Wed Mar 27, 2013 3:07 pm**

After putting my KR1-S together the indicator to the right side does not work. To the left everything works fine but to the right only the rear lights up but not flashing and no light in the front indicator.
If I change the wiring in front connecting the right indicator to the left's wiring - it works...

Advice needed???

Posted: **Wed Mar 27, 2013 11:34 pm**

you'll have a broken wire in the front right indicator circuit. time to dig out the wiring diagram and your resistance measuring device (hou you call a multi-meter in english ?) and dig in

Posted: **Thu Mar 28, 2013 2:47 pm**

Thank you - had hoped for some magical words... Will have to dig in....
Very much appreciated
Peter

Posted: **Thu Mar 28, 2013 11:27 pm**

easiest thing to do first is check that 12V arrives at the indicator, and take a wire and connect the "-" from the indicator to the chassis/battery minus

KR-1S.co.uk Forum

Right indicator does not work!

Right indicator does not work!