Rebuilding again
- daz680
- Oil Injector
- Posts: 505
- Joined: Mon May 02, 2011 6:34 pm
- Location: Nuneaton, Warwickshire
Rebuilding again
Start of my rebuild, still waiting for the frame and parts being aqua blasted but i'll start with some pics
NOS crankcases, pistons, rings, and replated barrels. Not in pic are nos little ends and gudgeon pins and retaining rings
NOS cylinder head complete with new head bolts
NOS head with NOS power valves, thermostat, KIPS pulleys from charles, also got new screws for pulleys and linkages
Tubs with new bolts, seals and bearings for the engine also got the bolts that martin has kindly had replated for me
NOS crankcases, pistons, rings, and replated barrels. Not in pic are nos little ends and gudgeon pins and retaining rings
NOS cylinder head complete with new head bolts
NOS head with NOS power valves, thermostat, KIPS pulleys from charles, also got new screws for pulleys and linkages
Tubs with new bolts, seals and bearings for the engine also got the bolts that martin has kindly had replated for me
Currently building RC30 lookalike
- daz680
- Oil Injector
- Posts: 505
- Joined: Mon May 02, 2011 6:34 pm
- Location: Nuneaton, Warwickshire
Engine will be built using genuine gaskets everywhere except the water pump housing. i've bought loads of stuff and duplicated a few things so will be having a sale once bike is completed as i've just added up the cost of all the engine parts and remedial work and nearly had a heart attack.
Crankcases £330
Head £220
powervales £110
Nos Cutch basket, release plate and clutch plates £170
Crank rebuild and barrels replated £600
Kips Pulleys £108
Rose joints for linkages £25
Gaskets, seals, nuts bolts, and studs about £170
Aqua Blasting £125
Bllody hell i shouldn't add this up it's making me light headed
Crankcases £330
Head £220
powervales £110
Nos Cutch basket, release plate and clutch plates £170
Crank rebuild and barrels replated £600
Kips Pulleys £108
Rose joints for linkages £25
Gaskets, seals, nuts bolts, and studs about £170
Aqua Blasting £125
Bllody hell i shouldn't add this up it's making me light headed
Last edited by daz680 on Tue Jan 22, 2013 3:50 pm, edited 1 time in total.
Currently building RC30 lookalike
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Go Daz, Go Dazdaz680 wrote:Engine will be built using genuine gaskets everywhere except the water pump housing. i've bought loads of stuff and duplicated a few things so will be having a sale once bike is completed as i've just added up the cost of all the engine parts and remedial work and nearly had a heart attack.
Lookin good
I'm gonna be building my engine soon so let me know what you have that is surplus.
Cheers
Andrew
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
- daz680
- Oil Injector
- Posts: 505
- Joined: Mon May 02, 2011 6:34 pm
- Location: Nuneaton, Warwickshire
Also found this if anyone is interested 89 dollars
http://www.ebay.com/itm/Kawasaki-KR250- ... 3f213756a4
http://www.ebay.com/itm/Kawasaki-KR250- ... 3f213756a4
Currently building RC30 lookalike
- daz680
- Oil Injector
- Posts: 505
- Joined: Mon May 02, 2011 6:34 pm
- Location: Nuneaton, Warwickshire
Got A bit done today
built up barrels and head with pulleys from charles and rose joint off ebay
Crank and new bearing in cases
Top end on
Painted these with black enamel then baked in oven at gas mark 2 for an hour to dry them.
Just got to pull my best gearbox and new clutch fom my other engine to fit into this one then put spare gearbox and clutch in the old engine
built up barrels and head with pulleys from charles and rose joint off ebay
Crank and new bearing in cases
Top end on
Painted these with black enamel then baked in oven at gas mark 2 for an hour to dry them.
Just got to pull my best gearbox and new clutch fom my other engine to fit into this one then put spare gearbox and clutch in the old engine
Currently building RC30 lookalike
- KFOR
- Heavy Smoker
- Posts: 351
- Joined: Tue Oct 18, 2011 9:02 pm
- Location: Somerset
Looking good that Daz... You must of spent many a lonely night on the computer sourcing those bits. Looking forward to more pickies.
Remember , you can't take the money with you so may as well enjoy it whilst you can. !!
Remember , you can't take the money with you so may as well enjoy it whilst you can. !!
Current Bikes.:- 2004 GSX-R 750 (modified)
CB750 Cafe racer (project build)
1978 Kawasaki Z1r (Mint)
2007 HRC Fireblade (1 of 200 in UK)
91 KR1s modified race bike.
CB750 Cafe racer (project build)
1978 Kawasaki Z1r (Mint)
2007 HRC Fireblade (1 of 200 in UK)
91 KR1s modified race bike.
-
- Heavy Smoker
- Posts: 397
- Joined: Wed May 09, 2007 1:24 pm
Hi Darren
Were the vapour blasted parts ok for you ?
thanks
Nick
CC Aqua Blasting
www.ccaquablasting.com
Were the vapour blasted parts ok for you ?
thanks
Nick
CC Aqua Blasting
www.ccaquablasting.com