Standard pipes
- daz680
- Oil Injector
- Posts: 505
- Joined: Mon May 02, 2011 6:34 pm
- Location: Nuneaton, Warwickshire
Shock
It's made by Wilbers, Revs suspension in is the uk importer. They sell them for £600 but i have ordered mine from a German supplier for £450. Want to put my airbox back on but can't with the R6 shock and dont want the standard one on so this is the next best as it has the remote resevoir and is specific to the KR1S. High and Low speed damping. You can even have ride height and hydraulic preload as extras. Sales blurb below
Type 641 Competition Ø 46 mm
with hose to reservoir
This shock absorber is connected with the remote reservoir by a high pressure resistant steel hose. It is an ideal alternative for road-motorbikes with limited space. The installation of the reservoir is fairly easy supported by the flexible hose line. You could place the reservoir in various positions for example at the rear frame where airflow provides extra cooling to the system. Even the compression settings for low-speed and high-speed, each alterable through 22 clicks for fine-tuning, can always be easily reached. The reboand is adjustable through an open bleed system by 22 clicks for a perfectly tuned suspension. As with all our models, the preload is
continuously adjustable.
Model- and Pricelist Wilbers Shock absorber Raising ride height possible
Hydrailic preload adjustment possible
Type 641 Competition Ø 46 mm
with hose to reservoir
This shock absorber is connected with the remote reservoir by a high pressure resistant steel hose. It is an ideal alternative for road-motorbikes with limited space. The installation of the reservoir is fairly easy supported by the flexible hose line. You could place the reservoir in various positions for example at the rear frame where airflow provides extra cooling to the system. Even the compression settings for low-speed and high-speed, each alterable through 22 clicks for fine-tuning, can always be easily reached. The reboand is adjustable through an open bleed system by 22 clicks for a perfectly tuned suspension. As with all our models, the preload is
continuously adjustable.
Model- and Pricelist Wilbers Shock absorber Raising ride height possible
Hydrailic preload adjustment possible
Currently building RC30 lookalike
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
- daz680
- Oil Injector
- Posts: 505
- Joined: Mon May 02, 2011 6:34 pm
- Location: Nuneaton, Warwickshire
About 10mm clearance, had to space out from bottom bracket a bit. Pipes are close to calliper tie rod aswell as bottom of belly pan.
Last edited by daz680 on Fri Oct 26, 2012 9:12 pm, edited 1 time in total.
Currently building RC30 lookalike
- daz680
- Oil Injector
- Posts: 505
- Joined: Mon May 02, 2011 6:34 pm
- Location: Nuneaton, Warwickshire
I have now completely stripped the bike, frame is going to be repaired (clock bracket lug) then powder coated along with the swing arm. I have a nos fairing and headlamp complete thats got a few marks thats being sorted at dream machine. When i get the crank and barrels back i'll be building a new engine with NOS crankcases,head, pistons, rings, gudgeon pins, clutch, kips valves, carb holders, powervalve pulleys off charles, gaskets and bolts. i'll post pics as i start the rebuild
Currently building RC30 lookalike
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
-
- Oil Injector
- Posts: 872
- Joined: Mon Sep 07, 2009 8:33 pm
- Location: east yorkshire