Page 1 of 1
BILLET ENGINE CASES
Posted: Mon Jun 18, 2012 4:55 pm
by satarn
I have found an engineering company who is going to quote to make up KR1S engine cases in billet . If you are interested in a set please contact me by phone or message me . 07770 552666 Krishna . They are currently making TZ250 cases .
Posted: Mon Jun 18, 2012 5:13 pm
by Luders
what's the ball part figure?
Posted: Mon Jun 18, 2012 6:09 pm
by Bikemike
I hope this isn't too stupid a question, but what advantages would billet cases have?
I didn't think the cases were the weak point on a KR (I thought the barrels were the problem) and cases are not particularly scarce yet (they pop up on eBay regularly enough).
Cheers,
Mike
Posted: Mon Jun 18, 2012 6:45 pm
by scooble
was it falconman who was experimenting with a longer stroke crank?
I think this would be a good oppertunity to experiment with different cranks
Posted: Tue Jun 19, 2012 1:32 pm
by TwoStroke Institute
Unless you have a inherent design fault like the 5KE TZ250, billet cases are not needed.
Posted: Thu Jun 21, 2012 3:14 pm
by satarn
I will hopefully be getting a ball part figure in July and if not to much a firm price by the end of july . It will give the option of a longer stroke and the use of other cylinders . Billet cases will be much stronger and will flex less under extreme load .