Project KR1SS - So far
- gary
- Smoker
- Posts: 72
- Joined: Tue Dec 21, 2010 11:57 pm
- Location: luton
Project KR1SS - So far
Before & after pictures of my re-built engine.
Its been vapour blasted by Asbury Auto Component Cleaning, the powder coating has been done by Triple S, the crank has been built by BDK. Its been fitted with Makita pistons & has all new bearings, seals & O rings, stainless steel bolts throughout, spitfire plugs fitted also has uprated clutch. The barrels & crank cases have been flowed, the flywheel lightened & has all been blue printed. All beautifully put back together by Martin 'Top Man ' He has also re-built the carbs with all new jets & N99 needles he really knows his stuff BIG THANKS
Its been vapour blasted by Asbury Auto Component Cleaning, the powder coating has been done by Triple S, the crank has been built by BDK. Its been fitted with Makita pistons & has all new bearings, seals & O rings, stainless steel bolts throughout, spitfire plugs fitted also has uprated clutch. The barrels & crank cases have been flowed, the flywheel lightened & has all been blue printed. All beautifully put back together by Martin 'Top Man ' He has also re-built the carbs with all new jets & N99 needles he really knows his stuff BIG THANKS
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
- martin
- Premix Junkie
- Posts: 1610
- Joined: Sat Jan 13, 2007 10:35 pm
- Location: luton,beds
it did cost a bit.
crank rebuilt at bdk
new mitaka pistons/rings/small ends/circlips
all cases aqua blasted
complete gasket set
new seals
new bearings
gary did spend a bit on his engine. he has spent loads more on other stuff as well inc suspension/paint/powdercoat.
i have done quite a bit of other stuff for gary including rebuilding his forks and other bits.
his bike will be worth seeing once done
it all depends what you want. sometimes you have to spend a bit to do the job right,
crank rebuilt at bdk
new mitaka pistons/rings/small ends/circlips
all cases aqua blasted
complete gasket set
new seals
new bearings
gary did spend a bit on his engine. he has spent loads more on other stuff as well inc suspension/paint/powdercoat.
i have done quite a bit of other stuff for gary including rebuilding his forks and other bits.
his bike will be worth seeing once done
it all depends what you want. sometimes you have to spend a bit to do the job right,
Last edited by martin on Sun Sep 08, 2013 11:44 am, edited 1 time in total.
current bikes
fully restored green/white kr1 b2
fully restored green/white kr1 b2
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
Does that make you a right Shiner Teerex ?
From where I come from the local football team are called 'the Shiners'
Surely not for the same reasons, he he !
Ok ok ok with a nick name like mine I ought to be more careful, cos I've more in keeping with a fat Scooby Doo nowadays than anything else
From where I come from the local football team are called 'the Shiners'
Surely not for the same reasons, he he !
Ok ok ok with a nick name like mine I ought to be more careful, cos I've more in keeping with a fat Scooby Doo nowadays than anything else
If it takes more than 2strokes then your just playing at it..
- gary
- Smoker
- Posts: 72
- Joined: Tue Dec 21, 2010 11:57 pm
- Location: luton
Hi,got married start of sept, so couldn't spend much on bike but fitted engine & acillaries. Got bike running sweet. Just got brakes, chain, & sprockets plus the bodywork to sort out. Should be ready for spring next year.
Future world champion posing with the bike
http://s1085.photobucket.com/albums/j43 ... nt=117.jpg
http://s1085.photobucket.com/albums/j43 ... nt=118.jpg
http://s1085.photobucket.com/albums/j43 ... nt=119.jpg
http://s1085.photobucket.com/albums/j43 ... =111-1.jpg
http://s1085.photobucket.com/albums/j43 ... nt=121.jpg
http://s1085.photobucket.com/albums/j43 ... nt=122.jpg
Future world champion posing with the bike
http://s1085.photobucket.com/albums/j43 ... nt=117.jpg
http://s1085.photobucket.com/albums/j43 ... nt=118.jpg
http://s1085.photobucket.com/albums/j43 ... nt=119.jpg
http://s1085.photobucket.com/albums/j43 ... =111-1.jpg
http://s1085.photobucket.com/albums/j43 ... nt=121.jpg
http://s1085.photobucket.com/albums/j43 ... nt=122.jpg
- gary
- Smoker
- Posts: 72
- Joined: Tue Dec 21, 2010 11:57 pm
- Location: luton
Hi,got married start of sept, so couldn't spend much on bike but fitted engine & acillaries. Got bike running sweet. Just got brakes, chain, & sprockets plus the bodywork to sort out. Should be ready for spring next year.
Future world champion posing with the bike
[
IMG]http://i1085.photobucket.com/albums/j43 ... 9o/121.jpg[/IMG]
Future world champion posing with the bike
[
IMG]http://i1085.photobucket.com/albums/j43 ... 9o/121.jpg[/IMG]
-
- Heavy Smoker
- Posts: 144
- Joined: Sun Dec 09, 2007 6:42 pm
- Location: Next to RAF Henlow
- Contact: