Marmite #2
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Re: Marmite #2
Quick update I have now got a UK LC frame so won't be using the German frame so I have a 1980 "W" reg
Last owner acquired it in 1988 and last taxed 1991
Log book now in my name
Needs tie bar brackets welding on as it's an earlier frame ,side stand bracket badly welded on and the centre stand tube is a bit of a mess and a small dent in one of the tubes but apart from that
So plan is to get some tie bar brackets made or get some from a scrap frame,cut sidestand bracket off and have it welded on properly.
Cut out centre stand tube and have a plain tube welded back in,braze /weld dent,sort lock stops
Swings and roundabouts and all that
Last owner acquired it in 1988 and last taxed 1991
Log book now in my name
Needs tie bar brackets welding on as it's an earlier frame ,side stand bracket badly welded on and the centre stand tube is a bit of a mess and a small dent in one of the tubes but apart from that
So plan is to get some tie bar brackets made or get some from a scrap frame,cut sidestand bracket off and have it welded on properly.
Cut out centre stand tube and have a plain tube welded back in,braze /weld dent,sort lock stops
Swings and roundabouts and all that
Last edited by headcoats on Mon Jan 13, 2014 10:12 pm, edited 1 time in total.
Can it yer old boiler
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Marmite #2
I'm sure Lee can sort those bits out for you Martin
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Re: Marmite #2
Need to decide how to get the chain inline as I have 8mm to make up
I already asked about what chain clearance is like with a 150 tyre fitted
See here
viewtopic.php?f=1&t=10705
If I just fit an 8mm offset front sprocket then the chain hits the frame
5mm front offset I think gives me just enough room ,so that means I will need 3mm off the rear sprocket carrier face.
It could be any number of combinations though as long as I can sit the chain away from the frame on the front and the tyre on the rear
I already asked about what chain clearance is like with a 150 tyre fitted
See here
viewtopic.php?f=1&t=10705
If I just fit an 8mm offset front sprocket then the chain hits the frame
5mm front offset I think gives me just enough room ,so that means I will need 3mm off the rear sprocket carrier face.
It could be any number of combinations though as long as I can sit the chain away from the frame on the front and the tyre on the rear
Can it yer old boiler
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: Marmite #2
for my KR1-SV bike, I had to take some material from the frame to clear the chain. there is enough so no prob
My ultimate goal is to die young as late as possible !
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Re: Marmite #2
Now have a NOVA certificate for the German frame
Will still need to get UK registered and get an age related plate
It is the better condition frame compared to the UK one as that turned out to have a bit of rot on the lower sections but still hope to get that repaired some time (God knows when )
Will still need to get UK registered and get an age related plate
It is the better condition frame compared to the UK one as that turned out to have a bit of rot on the lower sections but still hope to get that repaired some time (God knows when )
Can it yer old boiler
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Re: Marmite #2
Nice pic of LC with Aprilia RS 250 wheels
I have a rear RS wheel and it looks like the cush side will need serious engineering to get the wheel and chain aligned
Last edited by headcoats on Fri Dec 29, 2017 2:03 pm, edited 2 times in total.
Can it yer old boiler
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: Marmite #2
nice bike, except for that swing arm.
like many of those conversions, it is just too long for the bike and looks like one of those stupid american lengthened swing arm
like many of those conversions, it is just too long for the bike and looks like one of those stupid american lengthened swing arm
My ultimate goal is to die young as late as possible !
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Re: Marmite #2
Trouble with the standard LC,they are just like a moped with their spindly wheels etc so if you can add a bit of muscle to them then that's a good thing in my opinion .
Can it yer old boiler
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: Marmite #2
I know.
but if it were my bike I'd make a custom swing arm without the added length
but if it were my bike I'd make a custom swing arm without the added length
My ultimate goal is to die young as late as possible !
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Re: Marmite #2
I have some Lomas pipes for the LC and a while a go I was offered the Lomas GP style pipes( RGV 220 style) for a straight swop
I think I have had both sets for a few years now but the fella is coming next week to collect one set and he said it's up to me which set I keep
Still not sure but the GP style would be something different and I wouldn't have to fanny around with the sidestand position with these
I think I have had both sets for a few years now but the fella is coming next week to collect one set and he said it's up to me which set I keep
Still not sure but the GP style would be something different and I wouldn't have to fanny around with the sidestand position with these
Can it yer old boiler
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: Marmite #2
I always feel like "something is missing" looking sideways on a bike and not seeing an exhaust. no "GP's" for me
My ultimate goal is to die young as late as possible !
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Re: Marmite #2
Image works who do the decals have sent a pic of the slightly altered side panel decal , they have removed the "350" logo and replaced it with the "YPVS" logo which looks nice in my opinion
Can it yer old boiler
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Re: Marmite #2
Last edited by headcoats on Fri Dec 29, 2017 2:14 pm, edited 1 time in total.
Can it yer old boiler