I've missed her sooo much

Gordi · Post by **Gordi** » Sat Sep 11, 2010 2:24 pm

Hi Jnaus, You could try Charles for the KIPs pulleys. He might have some left from a batch he had made in Germany not too long ago. I have some and what a shame to fit them on a bike. Should frame them! Linkages came from Lee, also through this forum and there's a KIPs motor for sale also on here. My engine was nearly (but not quite) as bad as yours so it can be done. Don't despair!!!

Jnaus · Post by **Jnaus** » Sat Sep 11, 2010 2:37 pm

Cheers Gordi,
I bought a second KR1S off eBay. It is missing top end, rad and exhaust. But came with a complete spare engine including KIPS pulleys and carbs. I'm going to rat that bike for parts, then my mate is going to take that bike and try rebuild it.
I'm having a ball pulling stuff off my bike and finding it is still perfect! The carbs were spotless!
There's a few things I'll be hunting for soon, such as exhausts for both bikes, and a top end for the second bike. I still have my old bores and head but sadly there are rooted.
John

Jnaus · Post by **Jnaus** » Sun Sep 12, 2010 12:42 pm

Mhahaha

ScottaKR · Post by **ScottaKR** » Mon Sep 13, 2010 9:08 am

I can tell you now that thay aint goin to breed if thats what your thinking.

Jnaus · Post by **Jnaus** » Mon Sep 13, 2010 11:03 am

I dunno a nice dinner, some candle light..... I have 4 kids so I'm kind of an expert on bredding.

ScottaKR · Post by **ScottaKR** » Mon Sep 13, 2010 1:22 pm

Jnaus wrote: I have 4 kids so I'm kind of an expert on bredding.

Either that, or your just a horny bugger.

Jnaus · Post by **Jnaus** » Tue Sep 14, 2010 11:13 pm

Everybody get naked

It must be time to start cleaning

Jnaus · Post by **Jnaus** » Tue Sep 21, 2010 2:44 pm

Ok well now I'm out of bits to pull/ break off.
Time to start spending money. Forks and fairings are off to central Victoria for dads magic touch.
If anyone has the Exhaust file Fred was talking about could they please shoot over to me. I might get my little bro to have a crack at making them up.

fred · Post by **fred** » Tue Sep 21, 2010 6:53 pm

good luck mate ,sent your cone files

Luders · Post by **Luders** » Tue Sep 21, 2010 6:57 pm

You have some cleaning on your hands their bud.

Good luck with the restoration project.

Out of interest, how much time do you dedicate to the task per week?

Jnaus · Post by **Jnaus** » Tue Sep 21, 2010 10:04 pm

Probably a couple hours a night Luders. Once the kids go to bed I run for the garage. My wife is a photographer, so she works on the computer editing photos at night.

Jnaus · Post by **Jnaus** » Tue Sep 21, 2010 10:05 pm

Thanks Fred

Jnaus · Post by **Jnaus** » Fri Sep 24, 2010 10:24 am

What a joyous f'ing day.
So I load her up on the ute to take her to work and give her a bit of a tub.

I drown her her in degreaser, grab the pressure washer and go nuts.
Then I notice the paint coming off

then after work loading her back on the ute, and on of my co-workers says "Holly shit look at the big crack in the frame"
"Bullshit" says I. But much to my dismay it was not bullshit. Dirty big crack at the bottom engine mount bolt
So now I need to add ally welding and powdercoating the to do list.
It never ends.

Luders · Post by **Luders** » Fri Sep 24, 2010 12:14 pm

I'm not surprised about the paint coming away, but that's a bummer about the crack in the frame. Do you know of any local fabrication places?

I have to get the front subframe lugs tig welded back onto my frame, but was lucky to find a local place and the owner only charged me £20 for the work.

Jnaus · Post by **Jnaus** » Fri Sep 24, 2010 12:29 pm

I work at a car dealer so I'm sure I'll find someone through work. If not my dad and little brother are both coach builders making custom car parts so they will know someone.

KR-1S.co.uk Forum

I've missed her sooo much

Varios parts