balance shaft
Posted: Tue Jan 10, 2023 1:58 pm
Hi , I am just rebuilding my kr1 engine and the book says there are punch marks on the crank and balancer shaft but I can't find any ?
So I have set the crank at tdc and the balancer at 180 away from tdc ie. piston up weight furthest away from piston using a mark on the weight level to the casing
is this correct ? looks logical but could any one confirm it for me .
thanks
So I have set the crank at tdc and the balancer at 180 away from tdc ie. piston up weight furthest away from piston using a mark on the weight level to the casing
is this correct ? looks logical but could any one confirm it for me .
thanks