KR-1S.co.uk Forum

Cracking job on the calipers dan keep it up

Carbs was put in my friends ultra sonic cheaner after alot of de grease and cleaning but what a improvement





URL=http://s537.photobucket.com/user/dandan ... 6.jpg.html][/URL]

So the next picture is the result of many months work,I got the wheels, frame and alot of accessories powder coated, the frame was re done as I wasn't to happy the first time but 2nd it came out lovley.
A fully rebuilt and re gased shock was put in
Forks was rebuilt, I painted the front disks
New machined bars, every thing was cleaned and water tank ect is like new,
All the fixings was replated plus all the disk bolts was replaced with new ones, alit of bits like luggage hooks was redone in the olive green
Loads of nos parts fitted including fairing brackets,front clock bracket, both front foot rest hangers, loads of bolts and bearings all the headstock stuff, front foot pegs but still waiting for one
New Bridgestone tyres plus alot of bits aqua blasted and painted, wiring all sorted clocks was redone too
Fitted the callipers, new brake lines and rebuilt mastercylinders, new levers,

Very nice Dan, bet you can't wait for it to be finished.
Cheers
Bernie

Cracking job dan bet your well chuffed keep up the good work

Thanks guys it's coming together nicely now, motor would of been done today but seem to have lost the head gasket

Cheers Dan

Hi Dan,
It will be next to the 10mm socket and 10mm spanner that you can't find
Cheers
Bernie

Bike looks great Dan,

Thanks jarno I can't wait for the finished article!
Bernie it turns out it wasn't with the 10mm socket remembered I took the engine to fahron for his opinion on something and left the gasket there.. no wonder I couldn't find it
So made some progress today just about finished the engine just need to get a gear change seal and clutch arm seal, it's all nice again I put 2 f3 valves in as I had them from Charles still doing nothing, all fresh and some nice linkages thanks to Martin

That's a cracking looking motor Dan

Beautiful engine Dan

Did you lightend the flywheeel Dan?

Cheers lads I'm happy with how it's coming together.
Jarno well spotted iv got a few so thought I'd chuck one on see what all the fuss is about
Bit more done today too, got some billet exhaust hangers n bobbins also exhausts of a mate, so I polished the end cans and swapped the standard hangers over they do look the dogs! I can arrange to get some if any one fancy a set he has a few left.cheers Dan

I am sure you could get a bit more shine on your motor Dan




Get the Solvol out

That's nice bernie I was verry close to polishing the chamber covers whilst I was doing the end cans the solvol was out but I do like the finish of aqua blasting.
I do have a Kr1s that has a polished frame and forks I was thinking one day I'll do the swing arm and wheel edges

Top job dan not long and she will be all altogether looking mint awesome shine on that engine Bernie better than my mirror