I have a KR1S swinger in an RD frame
The quesion i need is after you have put the end caps in the ends of the pivot bolt spindle and tightened in the frame to the correct torque,how tight or loose does the swinger need to be ?
KR1S swingarm end cap clearance
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
KR1S swingarm end cap clearance
Can it yer old boiler
- SHimmer45
- Premix Junkie
- Posts: 1400
- Joined: Tue Jul 25, 2006 7:51 pm
- Location: SOuthampton Hants UK
- Contact:
from when i mounted my swinger i just tightened it down and it rotates on the spindle. if its too tight then you will possibly stretch the spindle.
if its too loose i would guess that it would generally make the handling sloppy and wear any linkages as well
post doesnt really help you just some ideas
if its too loose i would guess that it would generally make the handling sloppy and wear any linkages as well
post doesnt really help you just some ideas
94 GPz500S
KR1-S Project
KR1 donor
-
- Premix Junkie
- Posts: 1484
- Joined: Tue Jul 25, 2006 6:45 pm
- Location: 36 miles from mecca