kr1s swinging arm pivot bolt
-
- Light Smoker
- Posts: 45
- Joined: Thu Mar 13, 2008 1:43 pm
- Location: herts
kr1s swinging arm pivot bolt
any one know what other kawasaki uses same bolt,
the kr1s is thicker than kr1 bolt
bsa
the kr1s is thicker than kr1 bolt
bsa
- the-elf
- Avgas Sniffer
- Posts: 2800
- Joined: Wed Jul 26, 2006 2:48 pm
- Location: Rockingham, Western Australia
An RGV swing arm bolt is a straight swap for the KR1S and is a hollow bolt as well, so it's a big weight saving mod .
-- Lets go Racing
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
-
- Premix Junkie
- Posts: 1402
- Joined: Tue Feb 13, 2007 10:04 pm
any one know the kr1s pivot bold od off hand? my kr1 has a kr1s swing arm but i suspect iot has had work done to the swingarm rather than frame? the previous owner mentioned summat about machining to enable the kr1s swinger to fit but cant remember exactly what weas said. i can work out whats what if i know the pivot bolt sizes of the kr1 and kr1s. thanks guys, is there much in it between the rgv and kr pivot bolt? fancy that, an rgv part been used to SAVE weight on a kr!!!!!
-
- Premix Junkie
- Posts: 1484
- Joined: Tue Jul 25, 2006 6:45 pm
- Location: 36 miles from mecca
-
- Light Smoker
- Posts: 45
- Joined: Thu Mar 13, 2008 1:43 pm
- Location: herts
rgv swing arm bolt
hi what cc is the rgv,as i dont know anything about this bike thanksthe-elf wrote:An RGV swing arm bolt is a straight swap for the KR1S and is a hollow bolt as well, so it's a big weight saving mod .
bsa
- the-elf
- Avgas Sniffer
- Posts: 2800
- Joined: Wed Jul 26, 2006 2:48 pm
- Location: Rockingham, Western Australia
Yep and its the onlypart on an RGV that's lighter than the KR onemgtkr1 wrote: thanks guys, is there much in it between the rgv and kr pivot bolt? fancy that, an rgv part been used to SAVE weight on a kr!!!!!
-- Lets go Racing
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
- the-elf
- Avgas Sniffer
- Posts: 2800
- Joined: Wed Jul 26, 2006 2:48 pm
- Location: Rockingham, Western Australia
Re: rgv swing arm bolt
Its a suzuki RGV 250 VJ22 model swing arm bolt.bsa wrote:hi what cc is the rgv,as i dont know anything about this bike thanksthe-elf wrote:An RGV swing arm bolt is a straight swap for the KR1S and is a hollow bolt as well, so it's a big weight saving mod .
bsa
-- Lets go Racing
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
-
- Light Smoker
- Posts: 45
- Joined: Thu Mar 13, 2008 1:43 pm
- Location: herts
Re: rgv swing arm bolt
cheers elf very handy, bsathe-elf wrote:Its a suzuki RGV 250 VJ22 model swing arm bolt.bsa wrote:hi what cc is the rgv,as i dont know anything about this bike thanksthe-elf wrote:An RGV swing arm bolt is a straight swap for the KR1S and is a hollow bolt as well, so it's a big weight saving mod .
bsa
-
- Oil Injector
- Posts: 872
- Joined: Mon Sep 07, 2009 8:33 pm
- Location: east yorkshire
-
- Smoker
- Posts: 73
- Joined: Tue May 18, 2010 7:49 am
- Location: derby
swingarm bolt
so is it definitely 20mm kr1s and 15mm for the kr1,need to make sure before i start what i am up to
-
- Oil Injector
- Posts: 872
- Joined: Mon Sep 07, 2009 8:33 pm
- Location: east yorkshire
-
- Smoker
- Posts: 73
- Joined: Tue May 18, 2010 7:49 am
- Location: derby
pivot bolt
much appreciated,just wanted to know before drilling,needed to know just in case the swingarm i wish to fit,i could fit 1s one instead many thanks