Balance shaft rebuild?
- Joe439
- Smoker
- Posts: 75
- Joined: Sat Nov 17, 2007 8:59 am
- Location: Seattle - WA - USA
Balance shaft rebuild?
Is it possible to rebuild the balance shaft with a new bearing and seal?
"If it ain't smokin it's broken!"
"Silence! I kill you!"
Current Bikes: RGV250 vj22 RG250 mk3
NSR 250 mc21
KR250B TZR250 2ma TZR250 3XV
TZM150
"Silence! I kill you!"
Current Bikes: RGV250 vj22 RG250 mk3
NSR 250 mc21
KR250B TZR250 2ma TZR250 3XV
TZM150
-
- Heavy Smoker
- Posts: 474
- Joined: Fri Jun 26, 2009 12:09 am
- Location: Kingdom of the Netherlands
Re: Balance shaft rebuild?
I believe BDK can rebuild a balance shaft should it be necessary.
"Mine is a long and sad tale", said the mouse.
"Indeed it is", said Alice, looking at the mouse's tail.
"Indeed it is", said Alice, looking at the mouse's tail.
- Joe439
- Smoker
- Posts: 75
- Joined: Sat Nov 17, 2007 8:59 am
- Location: Seattle - WA - USA
Re: Balance shaft rebuild?
Yes it is needing rebuilding since rebuilding the engine, does anyone know what the bearing and seal part numbers are?
"If it ain't smokin it's broken!"
"Silence! I kill you!"
Current Bikes: RGV250 vj22 RG250 mk3
NSR 250 mc21
KR250B TZR250 2ma TZR250 3XV
TZM150
"Silence! I kill you!"
Current Bikes: RGV250 vj22 RG250 mk3
NSR 250 mc21
KR250B TZR250 2ma TZR250 3XV
TZM150
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
Re: Balance shaft rebuild?
Not sure if this helps you. I have never done one , but had this page book marked in the past
http://www.pjme.co.uk/acatalog/Kawasaki ... m_End.html
https://www.cmsnl.com/kawasaki-kr250c3- ... ml#results
Steve
http://www.pjme.co.uk/acatalog/Kawasaki ... m_End.html
https://www.cmsnl.com/kawasaki-kr250c3- ... ml#results
Steve
- Joe439
- Smoker
- Posts: 75
- Joined: Sat Nov 17, 2007 8:59 am
- Location: Seattle - WA - USA
Re: Balance shaft rebuild?
Yeah those links I've seen still doesn't give me the info I'm after somebody's got to know. What seal and bearing to use on it.
"If it ain't smokin it's broken!"
"Silence! I kill you!"
Current Bikes: RGV250 vj22 RG250 mk3
NSR 250 mc21
KR250B TZR250 2ma TZR250 3XV
TZM150
"Silence! I kill you!"
Current Bikes: RGV250 vj22 RG250 mk3
NSR 250 mc21
KR250B TZR250 2ma TZR250 3XV
TZM150
- James P
- Oil Injector
- Posts: 582
- Joined: Mon Mar 11, 2013 10:47 am
- Location: Sydney, Australia
Re: Balance shaft rebuild?
Joe,
See my reply under a previous topic: http://kr-1s.co.uk/forum/viewtopic.php?f=1&t=13790
You could modify "normal" 6303-C3 bearings and you could also perhaps use a 23-47-7 seal with a 0.7mm spacer.
Let us know what you end up doing!
Regards,
James
- Joe439
- Smoker
- Posts: 75
- Joined: Sat Nov 17, 2007 8:59 am
- Location: Seattle - WA - USA
Re: Balance shaft rebuild?
Went with the one offered through bdk.
"If it ain't smokin it's broken!"
"Silence! I kill you!"
Current Bikes: RGV250 vj22 RG250 mk3
NSR 250 mc21
KR250B TZR250 2ma TZR250 3XV
TZM150
"Silence! I kill you!"
Current Bikes: RGV250 vj22 RG250 mk3
NSR 250 mc21
KR250B TZR250 2ma TZR250 3XV
TZM150