KR-1S.co.uk Forum

Posted: **Sun Nov 18, 2007 3:37 pm**

Right, I was chuffed when my bits arrived, tried to fit them today and wondered why they didn't fit? After looking at the parts list on this website it appears that I'm missing a bit that goes in between the speedo drive and the wheel? (the bits in the red circle, numbered 1 & 2)
Unfortunately the parts list doesn't show the part numbers. Does anyone have a list which does show these numbers so I can try and order them?
See pic:

I presume the bit in the blue circle is the threaded bush that goes inside the left hand fork leg?

Posted: **Sun Nov 18, 2007 9:31 pm**

at the homepage off this forum, on top, there is a link with the parts and numbers

Posted: **Mon Nov 19, 2007 7:34 pm**

You mean this page?
http://www.kr-1s.co.uk/manual/parts.php

That doesn't show the speedo drive

Posted: **Mon Nov 19, 2007 7:47 pm**

Try here
http://www.teamsparrow.co.uk/
Parts list is on left hand side of page and it's still working

Posted: **Mon Nov 19, 2007 7:50 pm**

Posted: **Wed Nov 21, 2007 8:36 pm**

Many thanks! =D>

Posted: **Thu Nov 22, 2007 8:04 pm**

ZXR 400 USES THE SAME PART

KR-1S.co.uk Forum

Speedo drive fitting>?

Speedo drive fitting>?