Well Its Apart.....
Posted: Fri Jun 01, 2007 9:08 pm
with plans to build a 250 track bike, Ground up engine and refurb current bike over winter iive been getting bits of ebay (well actually a bike with loads of bits) the plan is to build and overhaul an engine with rebuilt crank flowed cases, baerrls and worked heads, all the bearings will be replaced as will most the seals.. I have finally taken the Donner engine (former racing engine) apart and now starts the build back up... But before i do here is what i have from that £280 ebay bike, (fairing has gone, frame going, other bits already moved on) and please rember i have actually throwen away a big box of usless stuff already such as KR1 chambers, shagged cases, and covers, seized bearings G box and 1 completly shagged crank.
Here. is the engine in bits + a few other bits n Bobs....3 sets of cases underneith and whats left of the plastic bits.. And all electrical's
and then there is still the 2 other boxes i need to sort out which is full of yam pistons (used i think) another g box, and some engine cases, thats what i acn see, but there is small bits in there too like the power valve i just found.
The Fun begins..... LOL
Here. is the engine in bits + a few other bits n Bobs....3 sets of cases underneith and whats left of the plastic bits.. And all electrical's
and then there is still the 2 other boxes i need to sort out which is full of yam pistons (used i think) another g box, and some engine cases, thats what i acn see, but there is small bits in there too like the power valve i just found.
The Fun begins..... LOL
best of luck to ya...