two stroke oil pump
Posted: Wed Sep 23, 2015 3:46 pm
KR1 "89" Ello all, is there a way to bleed the the pump
and how do I know its setup correctly?
and how do I know its setup correctly?
Bleed screw is located on the top of the oil pump.
I stuck a bit of premix in a temp tank and ran the bike on tickover until the oil ran free from the pump bleed screw, tightened it up and held the pump on full until the air bubbles disappeared from the oil lines.
Make sure when you synchronise your carbs, that you check the oil pump mark lines up when you are finished.
Cheers
Bernie