Noobie says hello

kghost · Post by **kghost** » Thu Jun 06, 2013 10:35 am

Hello,

I have a KR1B that's about 90% complete. I've been lurking and learning.

Thought it time to register and say hello

Post by **500bernie** » Thu Jun 06, 2013 12:14 pm

Welcome to the forum.
Post some photos of your bike,.

Cheers,
Bernie

kghost · Post by **kghost** » Thu Jun 06, 2013 12:18 pm

500bernie wrote:Welcome to the forum.
Post some photos of your bike,.

Cheers,
Bernie

Its rather ugly at the moment.....

Post by **500bernie** » Thu Jun 06, 2013 2:50 pm

Most of them are when we start (some worse than others), we always like to see the transformation from scrap to glory. [-o<

Binetta Steve · Post by **Binetta Steve** » Thu Jun 06, 2013 3:03 pm

Dont worry about the bike its the ugly members on here you need to be aware of. Welcome to a great resource and support forum.

Steve

kghost wrote:
500bernie wrote:Welcome to the forum.
Post some photos of your bike,.

Cheers,
Bernie
Its rather ugly at the moment.....

Top-shaggy · Post by **Top-shaggy** » Thu Jun 06, 2013 9:28 pm

Welcome fella

kghost · Post by **kghost** » Thu Jun 06, 2013 10:40 pm

Thanks for the replies and welcomes.

Here is 3196

http://i153.photobucket.com/albums/s203 ... /image.jpg

fred · Post by **fred** » Thu Jun 06, 2013 11:32 pm

welcome in ,are you doing it up or just gettin it on road f this summer ?

Post by **alimorg** » Thu Jun 06, 2013 11:36 pm

Hello and welcome
Cheers
Al

kghost · Post by **kghost** » Thu Jun 06, 2013 11:57 pm

It's winter here in Australia if you can call it winter in sunny Queensland on the Gold Coast.

My plan is to replace the parts stripped off over the years and get it running.....will go from there.

garye345 · Post by **garye345** » Fri Jun 07, 2013 1:00 am

How do fella!

fred · Post by **fred** » Fri Jun 07, 2013 1:20 am

id`e worry like ell having a carpeted workshop like that ,where do you do the welding ,cutting ect

Post by **500bernie** » Fri Jun 07, 2013 6:12 am

Hi Fred,
I don't think it is a carpet.

But I think that is a tube of solvol near the front wheel

kghost · Post by **kghost** » Fri Jun 07, 2013 6:43 am

LOL yeah its a carpet (or rug if you prefer).

I have burned several holes in it with various hot bits and the TIG welder over the last few months.

The wife gets tired of rugs and rotates them occasionally. I recycle them in the workshop.

Being middle aged and whatnot....makes standing on the concrete that much easier.

I was successful in finding some bits today...KIPS cables, a reg/rect. a radiator etc.

Still missing a CDI and a set of pipes but getting closer to hearing if it will run.

The big question I have: Do I get a KR1S CDI?

I seem to be under the impression that the S CDI opens the KIPS about 500 rpm higher. The S CDI also runs up to a higher RPM yes?

Should I source a KR1 CDI (21119-1234), a KR1S CDI (21119-1287) or spring for aftermarket like the PCDI-10K Zeel?

Thoughts?

Dejay · Post by **Dejay** » Tue Dec 31, 2013 2:22 am

Hello all new to forum just bought 91 kr1s will put up details when it arrives
Happy new year have a safe one
Cheers

KR-1S.co.uk Forum

Noobie says hello

Noobie says hello

Re: Noobie says hello

Re: Noobie says hello

Re: Noobie says hello

Re: Noobie says hello

Re: Noobie says hello

Re: Noobie says hello

Re: Noobie says hello

Re: Noobie says hello

Re: Noobie says hello

Re: Noobie says hello

Re: Noobie says hello

Re: Noobie says hello

Re: Noobie says hello