Re: Final KR Based Race Bike Project
Posted: Tue Jan 21, 2014 3:25 pm
looking great ben =D> =D>
can't wait to see it finnished.
can't wait to see it finnished.
KR-1S.co.uk Forum
Home of the Kawaski KR250 KR-1 KR-1S & KR-1R
http://kr-1s.co.uk/forum/
Final KR Based Race Bike Project
Page 22 of 44
Re: Final KR Based Race Bike Project
Posted: Wed Jan 22, 2014 12:43 pm
Cheers Jarno, neither can I
Re: Final KR Based Race Bike Project
Posted: Wed Jan 22, 2014 1:06 pm
Looking Good Ben =D> =D> =D>
Re: Final KR Based Race Bike Project
Posted: Thu Jan 23, 2014 12:26 am
Oooh that looks like it means business .. Good stuff !
Re: Final KR Based Race Bike Project
Posted: Thu Jan 23, 2014 2:13 am
spot on ,ben you have a realy good eye on lines n that ,whens it at cadwell ?
Re: Final KR Based Race Bike Project
Posted: Thu Jan 23, 2014 3:21 pm
Not sure yet Fred, I should be making an appearance around August time at Cadwell
Re: Final KR Based Race Bike Project
Posted: Sat Jan 25, 2014 4:32 pm
Managed to get a few more jobs done today.
Fitted the chain DID 520 ERS, the clutch lever and run switch. I've also cleaned off the old paint on the front fender and stripped it back to the white gel coat. I'm going to polish it up and take a mould from it, to create some new ones out of carbon fibre.
I was also having a dig around in my shed and found some old custom rearsets MJ gave me a few years back. They are set too far back for me to use as they are, but I am going to use them as templates and get them machined to suit.
Fitted the chain DID 520 ERS, the clutch lever and run switch. I've also cleaned off the old paint on the front fender and stripped it back to the white gel coat. I'm going to polish it up and take a mould from it, to create some new ones out of carbon fibre.
I was also having a dig around in my shed and found some old custom rearsets MJ gave me a few years back. They are set too far back for me to use as they are, but I am going to use them as templates and get them machined to suit.
Re: Final KR Based Race Bike Project
Posted: Sat Jan 25, 2014 4:43 pm
That looks like it is coming along great now Ben 
How about a close up of the Technoflex in the braced swinger?
How about a close up of the Technoflex in the braced swinger?
Re: Final KR Based Race Bike Project
Posted: Sat Jan 25, 2014 4:50 pm
Is this what you're after, or did you want one more from the side?
Re: Final KR Based Race Bike Project
Posted: Sat Jan 25, 2014 4:52 pm
Very nice =D> =D> =D>
=D> =D> =D>Re: Final KR Based Race Bike Project
Posted: Sat Jan 25, 2014 4:58 pm
Re: Final KR Based Race Bike Project
Posted: Wed Jan 29, 2014 12:44 pm
I've put the gear selector cover on and first part of the shifting mechanism.
This lovely piece of machined ally was made for me by a chap on the forum called Ronnie and if anyone is interested in having one made for their race or track bike, either drop me a PM and I'll give you his email address, alternatively PM him directly, here's his thread on them.
viewtopic.php?f=2&t=9650&hilit=rearsets
This lovely piece of machined ally was made for me by a chap on the forum called Ronnie and if anyone is interested in having one made for their race or track bike, either drop me a PM and I'll give you his email address, alternatively PM him directly, here's his thread on them.
viewtopic.php?f=2&t=9650&hilit=rearsets
Re: Final KR Based Race Bike Project
Posted: Wed Jan 29, 2014 1:52 pm
I did the same on my KR - it worked really well
Re: Final KR Based Race Bike Project
Posted: Wed Jan 29, 2014 8:29 pm
Hi Ben,
What rearsets are you using?
What rearsets are you using?
Re: Final KR Based Race Bike Project
Posted: Wed Jan 29, 2014 9:45 pm
is the spare hole in the plate for a MX style triangle prop stand or just to remove material?