Page 15 of 44
Re: Final KR Based Race Bike Project
Posted: Fri Jul 12, 2013 2:56 pm
by Luders
I'm not too sure at the moment Danny.
Amy wants it black and white, with a flourecent green flash through it somehow.
I'm fairly open to suggestions though if anyone wants to contribute their ideas.
Re: Final KR Based Race Bike Project
Posted: Fri Jul 12, 2013 5:49 pm
by Howie
What about early 80's gpz550?
The white/red/black colour.....................?
Might be a bit different to the race rep paintwork.
Re: Final KR Based Race Bike Project
Posted: Fri Jul 12, 2013 10:16 pm
by Howie
Or..............as I want to go with on my Kr1s project,
a variation on the Kr250a paint scheme? In green obviously
Re: Final KR Based Race Bike Project
Posted: Tue Jul 16, 2013 1:51 am
by TheDoctor46
Do a MotoGP ZX-RR replica
Re: Final KR Based Race Bike Project
Posted: Tue Jul 16, 2013 11:18 am
by scooble
Re: Final KR Based Race Bike Project
Posted: Tue Jul 16, 2013 1:39 pm
by TwoStroke Institute
Re: Final KR Based Race Bike Project
Posted: Tue Jul 16, 2013 9:48 pm
by Top-shaggy
I remember the old Clay Cross Kawasaki team from Broadleys Clay Cross, brilliant picture ! =D>
Re: Final KR Based Race Bike Project
Posted: Wed Jul 17, 2013 9:57 am
by scooble
Although the Clay Cross colour scheme is a bit old school, I do still quite like it.
I always thought that black and silver looks pretty classy with a touch of green (as long as you don't go overboard with the silver).
Something similar to the tech 3 Yamahas, but green instead of yellow
Re: Final KR Based Race Bike Project
Posted: Tue Jul 23, 2013 2:20 pm
by daz680
Hi Ben
Have you had any look with Kpec and your gears?
Re: Final KR Based Race Bike Project
Posted: Tue Jul 23, 2013 2:45 pm
by Luders
yeah, I'm going over after Oulton
Re: Final KR Based Race Bike Project
Posted: Tue Jul 23, 2013 10:07 pm
by 500bernie
Luders wrote:yeah, I'm going over after Oulton
Hi Ben,
To pick up the CR boxes?
Cheers
Bernie
Re: Final KR Based Race Bike Project
Posted: Mon Aug 05, 2013 6:35 pm
by Luders
Just working on the engine at the moment chaps, so there's not going to be any further updates for a month or so.
Re: Final KR Based Race Bike Project
Posted: Mon Aug 05, 2013 6:52 pm
by jarno
what kind of specs are you doing with the engine luders?
Re: Final KR Based Race Bike Project
Posted: Mon Aug 05, 2013 7:25 pm
by Luders
High spec. I was looking at a 90ยบ crank configuration, but I have decided looking at the costs not to bother. I am going with a crank with 110mm rods, custom pipes, all the usual flowing and port work with a twin pickup KX125 flywheel.
I will share the dyno results when it's finished.
Re: Final KR Based Race Bike Project
Posted: Mon Aug 05, 2013 7:52 pm
by scooble
how much work is involved converting the flywheel to a KX125?
What pistons are you using?
Are you using a Zeeltronic or an Ignitech
.....sorry about the Spanish inquisition
