Page 2 of 3
Re: Kr1s c2
Posted: Wed Jan 16, 2019 8:14 am
by Rolex
Cracking job on the calipers dan keep it up
Re: Kr1s c2
Posted: Wed Jan 16, 2019 8:58 pm
by dandan0162
Carbs was put in my friends ultra sonic cheaner after alot of de grease and cleaning but what a improvement
URL=
http://s537.photobucket.com/user/dandan ... 6.jpg.html]
[/URL]
Re: Kr1s c2
Posted: Wed Jan 16, 2019 9:48 pm
by dandan0162
So the next picture is the result of many months work,I got the wheels, frame and alot of accessories powder coated, the frame was re done as I wasn't to happy the first time but 2nd it came out lovley.
A fully rebuilt and re gased shock was put in
Forks was rebuilt, I painted the front disks
New machined bars, every thing was cleaned and water tank ect is like new,
All the fixings was replated plus all the disk bolts was replaced with new ones, alit of bits like luggage hooks was redone in the olive green
Loads of nos parts fitted including fairing brackets,front clock bracket, both front foot rest hangers, loads of bolts and bearings all the headstock stuff, front foot pegs but still waiting for one
New Bridgestone tyres plus alot of bits aqua blasted and painted, wiring all sorted clocks was redone too
Fitted the callipers, new brake lines and rebuilt mastercylinders, new levers,
Re: Kr1s c2
Posted: Wed Jan 16, 2019 10:39 pm
by 500bernie
Very nice Dan, bet you can't wait for it to be finished.
Cheers
Bernie
Re: Kr1s c2
Posted: Wed Jan 16, 2019 11:34 pm
by Rolex
Cracking job dan bet your well chuffed keep up the good work
Re: Kr1s c2
Posted: Wed Jan 16, 2019 11:44 pm
by dandan0162
Thanks guys it's coming together nicely now, motor would of been done today but seem to have lost the head gasket
Cheers Dan
Re: Kr1s c2
Posted: Thu Jan 17, 2019 9:33 am
by 500bernie
Hi Dan,
It will be next to the 10mm socket and 10mm spanner that you can't find
Cheers
Bernie
Re: Kr1s c2
Posted: Thu Jan 17, 2019 11:14 am
by jarno
Bike looks great Dan,
Re: Kr1s c2
Posted: Thu Jan 17, 2019 8:06 pm
by dandan0162
Re: Kr1s c2
Posted: Thu Jan 17, 2019 9:03 pm
by 500bernie
That's a cracking looking motor Dan
Re: Kr1s c2
Posted: Thu Jan 17, 2019 9:45 pm
by jarno
Beautiful engine Dan
Did you lightend the flywheeel Dan?
Re: Kr1s c2
Posted: Thu Jan 17, 2019 11:27 pm
by dandan0162
Re: Kr1s c2
Posted: Thu Jan 17, 2019 11:45 pm
by 500bernie
Re: Kr1s c2
Posted: Fri Jan 18, 2019 10:22 am
by dandan0162
That's nice bernie I was verry close to polishing the chamber covers whilst I was doing the end cans the solvol was out
but I do like the finish of aqua blasting.
I do have a Kr1s that has a polished frame and forks I was thinking one day I'll do the swing arm and wheel edges
Re: Kr1s c2
Posted: Fri Jan 18, 2019 10:24 am
by Rolex
Top job dan not long and she will be all altogether looking mint
awesome shine on that engine Bernie better than my mirror