Hi Gary,
It's been a bit quiet for a while, how is the mini dyna coil working out?
Cheers
Bernie
Project KR1SS - So far
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Project KR1SS - So far
Firecracker Red and Grey C3 300
- scooble
- Premix Junkie
- Posts: 1549
- Joined: Thu Jul 27, 2006 12:47 pm
- Location: West Sussex
- Contact:
Re: Project KR1SS - So far
I'm in the process of fitting a Nology Pro-fire coil, with 10mm high performance leads
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Project KR1SS - So far
Hi Tricia
That looks nice, can't say I have seen one of those before. I have the mini dyna coil with 8mm leads and E3 plugs, it runs great.
I should really pop around to Mick Abbey's and get it set up on the dyno.
Cheers
Bernie
That looks nice, can't say I have seen one of those before. I have the mini dyna coil with 8mm leads and E3 plugs, it runs great.
I should really pop around to Mick Abbey's and get it set up on the dyno.
Cheers
Bernie
Firecracker Red and Grey C3 300
- gary
- Smoker
- Posts: 72
- Joined: Tue Dec 21, 2010 11:57 pm
- Location: luton
Re: Project KR1SS - So far
Hi Bernie
Hope everything is going well with you & your bike.
Bike is running very well with the new coil fitted. Highly recommended mod. Been busy restoring CBR900RRN SC28, bought it as a non running street fighter for £750, putting it back to the original spec apart from a carbon can I am going to fit to it.
Hope everything is going well with you & your bike.
Bike is running very well with the new coil fitted. Highly recommended mod. Been busy restoring CBR900RRN SC28, bought it as a non running street fighter for £750, putting it back to the original spec apart from a carbon can I am going to fit to it.
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Project KR1SS - So far
Hi Gary,
Just fitted the coil and some E3 plugs (new version of the splitfires).
The frame and wheels look like they have just been done, very nice.
What's the bodywork like to get hold of?
Cheers
Bernie
Just fitted the coil and some E3 plugs (new version of the splitfires).
The frame and wheels look like they have just been done, very nice.
What's the bodywork like to get hold of?
Cheers
Bernie
Firecracker Red and Grey C3 300
- martin
- Premix Junkie
- Posts: 1610
- Joined: Sat Jan 13, 2007 10:35 pm
- Location: luton,beds
Re: Project KR1SS - So far
Looks like another member has put his 300cc Kr1s on a dyno and got good
Results. So let the bullshit commence. One member got. 67.1 and this other member has
Just got. 65 at the back wheel. (He did,not have his crankcases flowed). Three different dynos.
Results. So let the bullshit commence. One member got. 67.1 and this other member has
Just got. 65 at the back wheel. (He did,not have his crankcases flowed). Three different dynos.
Last edited by martin on Fri Jun 22, 2018 9:36 pm, edited 1 time in total.
current bikes
fully restored green/white kr1 b2
fully restored green/white kr1 b2
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
Re: Project KR1SS - So far
Martin I don’t need to put the two bikes you rebuilt and blueprinted on the dyno...................I know they are right, full stop.
Great job
Steve
Great job
Steve
- martin
- Premix Junkie
- Posts: 1610
- Joined: Sat Jan 13, 2007 10:35 pm
- Location: luton,beds
Re: Project KR1SS - So far
Someone has told me you took the kr to krazy kat dyno.
Is that right gary
Is that right gary
current bikes
fully restored green/white kr1 b2
fully restored green/white kr1 b2