Hi there,
excuse me for my english but I don´t use it for a long time (at last at school for more than 25 years).
I´ve bought a KR1-S last year and because its so much fun I bought a second one a month later.
One of them is knocked down to bring it back in good condition. By the way I´m going to take away the fairing and mount a handlebar that fits at my age. It takes a long time so far but I want to finish it for the next season.
I hope not to be bothersome if I asked for a lot of informations. I´ll try to put some pictures from my bikes into in the next time.
Regards
Christoph
Starter
-
alimorg
- Site Admin
- Posts: 1382
- Joined: Tue Jul 25, 2006 11:34 am
- Location: South Wales (Old)
- Contact:
Re: Starter
Hello and welcome Christoph
Cheers
Al
Cheers
Al
"A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools. " - Douglas Adams
-
Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
Re: Starter
Good to have you here Christoph
Where are you from? Be good if you could add location to the profile and let us see some pictures of your lovely KR Brood
Where are you from? Be good if you could add location to the profile and let us see some pictures of your lovely KR Brood
If it takes more than 2strokes then your just playing at it..
-
Christoph
- Newbie
- Posts: 17
- Joined: Mon Sep 23, 2013 9:29 pm
- Location: Cologne / Germany
Re: Starter
Thanks for your welcome!
I´m a little bit under time pressure because we went into holiday tomorrow.
This are the last pictures of the red one before I break it down.
I buy a little sandblastbox and do it with glasshot at all the small things.
Many parts are powder coated now.
I like polished rims
The new top yoke
Now it comes to a standstill with some parts of the engine cases. I want to polish them myself but I´m not satisfied with the result.
And this is my little green one which is responsible for my fun on road!
Bye for now!
I´m a little bit under time pressure because we went into holiday tomorrow.
This are the last pictures of the red one before I break it down.
I buy a little sandblastbox and do it with glasshot at all the small things.
Many parts are powder coated now.
I like polished rims
The new top yoke
Now it comes to a standstill with some parts of the engine cases. I want to polish them myself but I´m not satisfied with the result.
And this is my little green one which is responsible for my fun on road!
Bye for now!
-
Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
-
JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: Starter
nice bikes, but I want pics from that little one against the wallChristoph wrote:
what is it ?
My ultimate goal is to die young as late as possible !
-
KR-1R
- Premix Junkie
- Posts: 1587
- Joined: Wed May 16, 2007 2:24 am
Re: Starter
.
.
willkommen Christoph
with that kind of neatly ordered efficiency in your garage you must be from Deutschland? or has Martin gone on holiday abroad?
okay I did peak at your .de photo hosting service
.
willkommen Christoph
with that kind of neatly ordered efficiency in your garage you must be from Deutschland? or has Martin gone on holiday abroad?
okay I did peak at your .de photo hosting service-
375
- Premix Junkie
- Posts: 1305
- Joined: Fri Apr 18, 2008 9:41 pm
- Location: Essex. Depeche Mode, Town
Re: Starter
Nice work 
and i like the work bench, (Hospital bed) ?
and i like the work bench, (Hospital bed) ?Ernest borgnine.
Best film, The Vikings
Best film, The Vikings
-
jarno
- Oil Injector
- Posts: 706
- Joined: Sat Aug 08, 2009 9:29 pm
- Location: the netherlands
-
garye345
- Premix Junkie
- Posts: 1231
- Joined: Tue Nov 13, 2007 8:52 pm
- Location: Yorkshire
- Contact:
Re: Starter
Looking Good!
Thanks for the photo's
.
Thanks for the photo's
.I used to be so care less,as if i could'nt careless.
-
500bernie
- Avgas Sniffer
- Posts: 3396
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Starter
Looking good
(and I like the home made bench)
Cheers
Bernie
(and I like the home made bench)
Cheers
Bernie
Firecracker Red and Grey C3 300
-
Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
Re: Starter
Welcome to the forum, the exhausts look nice, and a great colour combo.
-
Christoph
- Newbie
- Posts: 17
- Joined: Mon Sep 23, 2013 9:29 pm
- Location: Cologne / Germany
Re: Starter
Thanks for your welcome, it´s great to be here!
@ JanBros
A Kreidler Florett RMC/S (built up with the obligatory RS-machine at this time
). But it´s in a real bad condition. Current photos are to painful. 
This is a projekt for winter but not this one.
@ KR1-R
I sent you another picture while I´m working in it and you don´t believe that ist the same place.
Please don´t do wrong to Martin. I´ve seen the pictures of his KR1 in this forum and I wont to kneel down for this great job! =D> 
=D>
@ 375
Yes it´s a hospital bed. Real good for light bikes. My wife work in a hospital and I ask what they do with the old beds. They called the srap dealer!
So I get one. 
@ JanBros
I´m looking for old photos but their lost by the last removal. This is the reason because I´m infected by the dangerous "2-stroke virus"!nice bikes, but I want pics from that little one against the wall
what is it ?
A Kreidler Florett RMC/S (built up with the obligatory RS-machine at this time
). But it´s in a real bad condition. Current photos are to painful. This is a projekt for winter but not this one.@ KR1-R
I sent you another picture while I´m working in it and you don´t believe that ist the same place.
Please don´t do wrong to Martin. I´ve seen the pictures of his KR1 in this forum and I wont to kneel down for this great job! =D> =D>@ 375
Yes it´s a hospital bed. Real good for light bikes. My wife work in a hospital and I ask what they do with the old beds. They called the srap dealer!
So I get one.