Hi Guys,
I am now looking to start my 92 KR1S C3 restoration after taking the plunge and purchasing about a month ago.
Sorry this must seem like a really stupid question, but as I am no expert on the KR1s, what are the differences in the panels in model years, or are they all interchangeable? I was going to look at trying to pick up some second hand ones as some of mine have damage.
Any help greatly appreciated.
Cheers
Ian
KR1S Panels, differences?
-
- Smoker
- Posts: 88
- Joined: Tue Jun 05, 2012 5:01 pm
- Location: South east England
- pablo
- Premix Junkie
- Posts: 1546
- Joined: Fri Nov 14, 2008 9:37 pm
- Location: Co Durham
They are Ian, but good original bodywork is increasingly difficult to find. Busted bodywork IS repairable if you've got the skills. I havn't so I got someone to repair ours which was a bit of a mess.
There are a few threads on the forum where members have repaired their own with good results.
Good luck with the bike
There are a few threads on the forum where members have repaired their own with good results.
Good luck with the bike
"Turned out nice again"
-
- Smoker
- Posts: 88
- Joined: Tue Jun 05, 2012 5:01 pm
- Location: South east England
Thanks Pablo,pablo wrote:They are Ian, but good original bodywork is increasingly difficult to find. Busted bodywork IS repairable if you've got the skills. I havn't so I got someone to repair ours which was a bit of a mess.
There are a few threads on the forum where members have repaired their own with good results.
Good luck with the bike
I am happy to have a go at repairing the panel work, it is just easier to start with the best you can find. I guess after 20 years you have to take what is around.