can anyone help?
i need to know the foolowing please,silly me didnt measure before stripping.
the distance between the the rear frame rail to the floor when bike upright.
distance between the top of swingarm to rear frame rail.
i might need some other measurements at some point cheers
rear ride height wanted please
-
- Smoker
- Posts: 73
- Joined: Tue May 18, 2010 7:49 am
- Location: derby
-
- Smoker
- Posts: 73
- Joined: Tue May 18, 2010 7:49 am
- Location: derby
ride height
just need some basic measurements so i know what length the suspension rods need to be
- ScottaKR
- Premix Junkie
- Posts: 1521
- Joined: Fri Aug 10, 2007 2:52 pm
- Location: Australia
I'm sure it's been posted in here before for people doing the R6 conversion.
I've done the R6 conversion myself on my KR1, but have left the rear end up high and just raised the front a bit to compensate instead.
I've done the R6 conversion myself on my KR1, but have left the rear end up high and just raised the front a bit to compensate instead.
KR250 Tandem Twin (Naked)
KR1 Red/White
KR1S Track Bike (has been put on hold for now)
ZXR750 H1 (Winter project)
KR1 Red/White
KR1S Track Bike (has been put on hold for now)
ZXR750 H1 (Winter project)
-
- Smoker
- Posts: 73
- Joined: Tue May 18, 2010 7:49 am
- Location: derby
ride height
thanks i will have a look again to see if i can find the info