What tools do i need and any tips
Whats the best thing to measure the oil height etc
Plus what grade oil to use ?
Any advice on changing the fork oil on a KR1S set of forks ?
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Any advice on changing the fork oil on a KR1S set of forks ?
Can it yer old boiler
-
- Premix Junkie
- Posts: 1264
- Joined: Tue Jul 25, 2006 6:35 pm
- Location: Lincolnshire
I used Silkolene fork oil SAE10.
I never had the measure thingy, so i drained one leg at a time, pumped the forks, left it a while then pumped them again. I just waited till there was no more to come out.
I measured the 355ml in two stages, 300ml i measured in a jug, and for the 55ml i used a syringe.
The handling was so much better for fresh oil.
I never had the measure thingy, so i drained one leg at a time, pumped the forks, left it a while then pumped them again. I just waited till there was no more to come out.
I measured the 355ml in two stages, 300ml i measured in a jug, and for the 55ml i used a syringe.
The handling was so much better for fresh oil.