Hi all...
Could someone kindly measure their brackets for me please... The two that bolt onto the frame above the engine... They hold the top fairing in place...
Mine are pretty mangled and I need to get some more made up... From what I can work out, they're 75mm from tip to tip...
But, after comfirmation before I start fabricating something...
Also, it seems I need to make 4 spacers (8 mm thick) to keep the front mudguard off the front tyre... Is this normal or do I have a weird mudguard???
Cheers in advance
Nate
Fairing brackets... Measurement needed
- nate
- Heavy Smoker
- Posts: 437
- Joined: Wed Jan 10, 2007 4:57 pm
- Location: Cornwall
-
- Premix Junkie
- Posts: 1484
- Joined: Tue Jul 25, 2006 6:45 pm
- Location: 36 miles from mecca
- mr_bungholeo
- Premix Junkie
- Posts: 1225
- Joined: Wed Mar 21, 2007 7:55 pm
- Location: braintree
-
- Premix Junkie
- Posts: 1484
- Joined: Tue Jul 25, 2006 6:45 pm
- Location: 36 miles from mecca
- the-elf
- Avgas Sniffer
- Posts: 2800
- Joined: Wed Jul 26, 2006 2:48 pm
- Location: Rockingham, Western Australia
I think it varies on the front mudguard, Ive had one that needed spacers to clean the front wheel and one that didn't both of these were pre USD front end on my bike.
-- Lets go Racing
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
- nate
- Heavy Smoker
- Posts: 437
- Joined: Wed Jan 10, 2007 4:57 pm
- Location: Cornwall