Hi all,
I m not a mechanic but am able to carry out some work. In the middle of a restoration project of my Kr1 89.
Unfortunately after having replaced the broken clutch star with a billet one that Mark from this forum made. Assembly was made according to parts and service manual But I am still unable to make the clutch slip. What am I doing wrong? Any tips would be much appreciated.
Clutch assembly won’t slip! What am I doing wrong
-
- Newbie
- Posts: 13
- Joined: Mon Aug 12, 2019 10:10 am
-
- Premix Junkie
- Posts: 1587
- Joined: Wed May 16, 2007 2:24 am
Re: Clutch assembly won’t slip! What am I doing wrong
.
.
there is one thin friction plate 13088-1079 on outside (last)
viewtopic.php?f=8&t=12956&p=93290&hilit ... ion#p93290
.
there is one thin friction plate 13088-1079 on outside (last)
viewtopic.php?f=8&t=12956&p=93290&hilit ... ion#p93290
-
- Newbie
- Posts: 13
- Joined: Mon Aug 12, 2019 10:10 am
Re: Clutch assembly won’t slip! What am I doing wrong
Hey,
Thanks for the info. That was it.
One friction disc has a not smaller but larger inner diameter than the others. It is not really visible in the parts catalog but when you have the discs all layer out it is very obvious.
Many thanks.
Thanks for the info. That was it.
One friction disc has a not smaller but larger inner diameter than the others. It is not really visible in the parts catalog but when you have the discs all layer out it is very obvious.
Many thanks.
Last edited by Xirious on Thu Oct 24, 2019 3:23 pm, edited 1 time in total.
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: Clutch assembly won’t slip! What am I doing wrong
no one ever tried to use 6 normal friction plates and leave out the spring and thrust washer ?
never had to buy a new clutch so haven't tried it myself.
never had to buy a new clutch so haven't tried it myself.
My ultimate goal is to die young as late as possible !
-
- Heavy Smoker
- Posts: 474
- Joined: Fri Jun 26, 2009 12:09 am
- Location: Kingdom of the Netherlands
Re: Clutch assembly won’t slip! What am I doing wrong
The KR-1 F3 kit manual shows exactly that, Jan- fit 6 normal friction plates and delete the spring and washer 49074-1051 and 92144-1315.
"Mine is a long and sad tale", said the mouse.
"Indeed it is", said Alice, looking at the mouse's tail.
"Indeed it is", said Alice, looking at the mouse's tail.