Is the radiator stone guard a standard fitment on the KR1s or is it an aftermarket part?
Pops
Radiator Guard
-
- Oil Injector
- Posts: 706
- Joined: Sun Sep 30, 2007 5:59 pm
Re: Radiator Guard
Standard fitment, made of very thin mesh, and usually rusted out in places, not the highest quality part, but to be expected given the bikes age.
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Re: Radiator Guard
They were still available till a few years ago. Might be worth checking Cradely Kawasaki.
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
- Garry
- Premix Junkie
- Posts: 1436
- Joined: Tue Jul 25, 2006 8:01 pm
- Location: E.Midlands
Re: Radiator Guard
A lot of the ones i have come across have been snapped off because the retaining screws at the bottom
become seized.
A cheap option is to get some honeycomb mesh - you can get it from B&Q (and of course ebay) - and wire
it in place. Spray it black and you can't tell.
become seized.
A cheap option is to get some honeycomb mesh - you can get it from B&Q (and of course ebay) - and wire
it in place. Spray it black and you can't tell.
Smokings Good For You