Wheel Run Out Tolerance

Wheels, shocks, forks, frame
Post Reply
headcoats
Avgas Sniffer
Posts: 2120
Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country

Wheel Run Out Tolerance

Post by headcoats »

I can't get into the section on here for the manual, so does anyone know what's the maximum run out allowed please :P
Can it yer old boiler
Luders
Avgas Sniffer
Posts: 3926
Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire

Re: Wheel Run Out Tolerance

Post by Luders »

Not sure why the main site is down, that isn't anything I've f'ked up Martin.
RickNC30
Smoker
Posts: 53
Joined: Sun Jul 31, 2016 10:47 am

Re: Wheel Run Out Tolerance

Post by RickNC30 »

Specified maximum run out is 0.5mm axial and 0.8mm radial...

Rick
headcoats
Avgas Sniffer
Posts: 2120
Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country

Re: Wheel Run Out Tolerance

Post by headcoats »

Oh dear then as I have 2.00mm axial :cry:

Anyone able to true them up ?
Can it yer old boiler
headcoats
Avgas Sniffer
Posts: 2120
Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country

Re: Wheel Run Out Tolerance

Post by headcoats »

Spoke to one place that does the truing up of the wheels and they said they work to within 1.00mm tolerance which surprised me

So for £60 an hour I may have had the 2mm reduced to 1mm :shock:
Can it yer old boiler
Post Reply