KR1 project - i like a challenge
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
Not beeing funny ,but these photos depress me, just been out to give the bike a gt85 shower following todays 55 mile ride. And i know as i walk away and close the garage doors Wills engine is 500% cleaner than mine.
I need to stop riding and start saving for the big upgrade.
Ps really nice job Martin, Will im sure you are delighted with this work.
I need to stop riding and start saving for the big upgrade.
Ps really nice job Martin, Will im sure you are delighted with this work.
-
- Heavy Smoker
- Posts: 132
- Joined: Tue Oct 23, 2012 8:33 pm
- Location: preston
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
http://www.ebay.co.uk/itm/h***a-NR-750- ... 3cbeac441e
Dream on !
The Kr1S is in good condition, i keep peerving to see what greatblooks like , then go home and developnthe plan.
If you have not been to fastline in the las 16 months, they have moved to New Hall ane near Honebase
Dream on !
The Kr1S is in good condition, i keep peerving to see what greatblooks like , then go home and developnthe plan.
If you have not been to fastline in the las 16 months, they have moved to New Hall ane near Honebase
-
- Heavy Smoker
- Posts: 132
- Joined: Tue Oct 23, 2012 8:33 pm
- Location: preston
just been doing a little on my rear end.....
please can someone post me a picture of there rear end with no tail unit on so i can if i have missed anything, i need to know how rear light and no plate bulb goes, also think i've missed a bit off rear seat holder
if you can help, i'll be very grateful
please can someone post me a picture of there rear end with no tail unit on so i can if i have missed anything, i need to know how rear light and no plate bulb goes, also think i've missed a bit off rear seat holder
if you can help, i'll be very grateful
New to Forum, restoring a KR1...or should i say building from scratch
-
- Oil Injector
- Posts: 889
- Joined: Wed Jan 18, 2012 7:25 pm
- Location: East Yorkshire
Hi Will77,
Take alook at my video as i did a walk round my bike with no bodywork on, hope this helps.
http://www.youtube.com/watch?v=6jkJttbe6ZE
Take alook at my video as i did a walk round my bike with no bodywork on, hope this helps.
http://www.youtube.com/watch?v=6jkJttbe6ZE
It's nice to be important, but more important to be nice.
-
- Heavy Smoker
- Posts: 132
- Joined: Tue Oct 23, 2012 8:33 pm
- Location: preston
Howie wrote:just been doing a little on my rear end.....Ermplease can someone post me a picture of there rear end
ha ha, Not that rear End!!!! Keep that for the Rude stuff. haha. and thanks its getting there now
Anyway, looking good there Will
New to Forum, restoring a KR1...or should i say building from scratch
-
- Heavy Smoker
- Posts: 132
- Joined: Tue Oct 23, 2012 8:33 pm
- Location: preston
collect engine off martin as well as calipers,
wiring loom
i have sent Rad off full rebuild, back next week
fit rear shock, should be back next week sometime from professor
plastics have been sent to a friend for a full repair and one off paint scheme
and basically bolt it all together, sent some more bits to platers so looking forward to collect them next week,
seem to be cracking on mate a little to the disapproval to the Missus but i'm off to collect her engagement ring tomorrow so should be ok for another week in the garage after that!
wiring loom
i have sent Rad off full rebuild, back next week
fit rear shock, should be back next week sometime from professor
plastics have been sent to a friend for a full repair and one off paint scheme
and basically bolt it all together, sent some more bits to platers so looking forward to collect them next week,
seem to be cracking on mate a little to the disapproval to the Missus but i'm off to collect her engagement ring tomorrow so should be ok for another week in the garage after that!
New to Forum, restoring a KR1...or should i say building from scratch
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull