Project KR1SS - So far

Show us that box of bits in your shed!
Marty_Rillo
Heavy Smoker
Posts: 199
Joined: Wed Dec 16, 2009 9:41 pm
Location: Shetland

Re: Project KR1SS - So far

Post by Marty_Rillo »

Here's an odd question Gary,
My barrels seem to be different lengths requiring me to run two base gaskets to even it out.
Did you get your barrels machined to be the same lenght and then do the ports on it?
Might as well ask you pair, as the forum seems quiet right now, except your thread!!
Cheers from a very jealous Martin.
maccas
Oil Injector
Posts: 872
Joined: Mon Sep 07, 2009 8:33 pm
Location: east yorkshire

Re: Project KR1SS - So far

Post by maccas »

Martin,

I'd be interested to hear the spec as i'm sure others would too.

Dan
User avatar
JanBros
Avgas Sniffer
Posts: 3306
Joined: Wed Jul 26, 2006 11:50 pm
Location: the land of Francorchamps

Re: Project KR1SS - So far

Post by JanBros »

yes Marty, best is to have your barrels machined so they both have the same height.
placing more gasketts under one results in that your barrels have slightly different timings.
My ultimate goal is to die young as late as possible !
User avatar
JanBros
Avgas Sniffer
Posts: 3306
Joined: Wed Jul 26, 2006 11:50 pm
Location: the land of Francorchamps

Re: Project KR1SS - So far

Post by JanBros »

martin wrote: but maybe this whole thing about brake horse power figures has really been about
dick size

despite what certaian negatve people say,
it does make me smile that this bike is the most powerfull kr1s out there.
and yet people don't want to ask questions about the spec of this bike dispite it being in class mechanics magazine
if you want to go on, I can to ... :?

I agree with you it's about dick sizes. it's you that keeps on mentioning yours is the biggest and as I am not interested in the size of your dick I'm not going to ask for it's size.
My ultimate goal is to die young as late as possible !
Luders
Avgas Sniffer
Posts: 3926
Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire

Re: Project KR1SS - So far

Post by Luders »

I'm not interested in dick size either, but am interested in the bike/tune.

Here are some questions to get us going.

What are the port timings and transfer heights?

On the 300, is it on a standard crank, or is stroked?

What pistons do they use and what weight and shape are they?

Did you do anything on the inlet side?

Have you changed anything on the resonator chamber volumes?

What is the torque curve like and max output?

Has there been any flywheel lightening like Bernies?
maccas
Oil Injector
Posts: 872
Joined: Mon Sep 07, 2009 8:33 pm
Location: east yorkshire

Re: Project KR1SS - So far

Post by maccas »

Squish clearance, squish area ratio, compression ratio would also be of interest.

Is the airbox standard?

Dan
DougB
Oil Injector
Posts: 590
Joined: Thu Dec 12, 2013 9:58 pm
Location: York

Re: Project KR1SS - So far

Post by DougB »

Have you had to do anything to the clutch/had any problems with slip?
Luders
Avgas Sniffer
Posts: 3926
Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire

Re: Project KR1SS - So far

Post by Luders »

Any updates to the questions Martin? We're all in suspense here...
User avatar
JanBros
Avgas Sniffer
Posts: 3306
Joined: Wed Jul 26, 2006 11:50 pm
Location: the land of Francorchamps

Re: Project KR1SS - So far

Post by JanBros »

only 2.5 HP less, but it is a 250 ...

viewtopic.php?f=7&t=3893&start=45
My ultimate goal is to die young as late as possible !
User avatar
gary
Smoker
Posts: 72
Joined: Tue Dec 21, 2010 11:57 pm
Location: luton

Re: Project KR1SS - So far

Post by gary »

Hi, decided to upgrade my coil the other day. Nothing wrong with my old coil but because of the engine tune I have decided to upgrade. Fitted this mini dyna high voltage ignition coil with Taylor 8mm ignition leads. Has double the voltage of the standard coil, will give me smoother running & better combustion. =D>
Image
Image
DougB
Oil Injector
Posts: 590
Joined: Thu Dec 12, 2013 9:58 pm
Location: York

Re: Project KR1SS - So far

Post by DougB »

Looks like a good fit, let us know how it goes.
mellorp
Heavy Smoker
Posts: 420
Joined: Fri Sep 19, 2014 6:44 pm
Location: South Manchester

Re: Project KR1SS - So far

Post by mellorp »

User avatar
Top-shaggy
Premix Junkie
Posts: 1966
Joined: Mon Oct 31, 2011 11:09 pm
Location: Derbyshire

Re: Project KR1SS - So far

Post by Top-shaggy »

Looks like a great mod, please let us know how it runs :)
Liking that !
If it takes more than 2strokes then your just playing at it..
stevo135+
Smoker
Posts: 58
Joined: Tue Sep 01, 2015 1:23 pm

Re: Project KR1SS - So far

Post by stevo135+ »

I love that nice trick Dyna coil! It's got me wondering if they make a single output one I could make fit onto my KMX maybe? I'm liking all these trick KR1S engine builds and bike projects immensely too!
User avatar
scooble
Premix Junkie
Posts: 1549
Joined: Thu Jul 27, 2006 12:47 pm
Location: West Sussex
Contact:

Re: Project KR1SS - So far

Post by scooble »

also looking to upgrade mine for racing, so please keep us posted
Post Reply