My project so far
-
- Smoker
- Posts: 70
- Joined: Sun Oct 29, 2006 11:58 pm
- Location: frinton on sea , essex
My project so far
Graham File built and tuned engine with 35mm carbs and Zeeltronic ignition, runs beautifully . Set up carburation at Dynotech. Weighs a genuine 121kg wet weight and currently producing 60 bhp at rear wheel according to dynotech . Graham file will soon be doing more engine work including fitting a stroked crank with new stroke of 54.6 mm. Hope you all like it .
regards Krish
- SHimmer45
- Premix Junkie
- Posts: 1400
- Joined: Tue Jul 25, 2006 7:51 pm
- Location: SOuthampton Hants UK
- Contact:
- SHimmer45
- Premix Junkie
- Posts: 1400
- Joined: Tue Jul 25, 2006 7:51 pm
- Location: SOuthampton Hants UK
- Contact:
-
- Premix Junkie
- Posts: 1484
- Joined: Tue Jul 25, 2006 6:45 pm
- Location: 36 miles from mecca
- the-elf
- Avgas Sniffer
- Posts: 2800
- Joined: Wed Jul 26, 2006 2:48 pm
- Location: Rockingham, Western Australia
Now I like that. Lovly job.
-- Lets go Racing
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
-
- Smoker
- Posts: 70
- Joined: Sun Oct 29, 2006 11:58 pm
- Location: frinton on sea , essex
- si.likes.guiness
- Heavy Smoker
- Posts: 197
- Joined: Sat May 24, 2008 7:49 pm
- Location: chesterfield
-
- Site Admin
- Posts: 1382
- Joined: Tue Jul 25, 2006 11:34 am
- Location: South Wales (Old)
- Contact:
-
- Heavy Smoker
- Posts: 261
- Joined: Sat Sep 06, 2008 5:02 pm
- Location: notts
- ScottaKR
- Premix Junkie
- Posts: 1521
- Joined: Fri Aug 10, 2007 2:52 pm
- Location: Australia
Absloutely stunning bike. =D> =D> =D> =D>
What are the chambers?
Youve done a fantastic job on the customised tail section, and the MC28 front really suits the bike.
Will be very interested to see how the new crank works (a stroked stroker ).
I wonder what he's useing for the webs...... and if he's useing shorter rods, or pistons with a lower deck height, or maybe a small spacer under the barrels, or......
Gotta stop thinking about that or it'll do my head in.
PS. welcome to the forum mate.
Cheers, Scott.
What are the chambers?
Youve done a fantastic job on the customised tail section, and the MC28 front really suits the bike.
Will be very interested to see how the new crank works (a stroked stroker ).
I wonder what he's useing for the webs...... and if he's useing shorter rods, or pistons with a lower deck height, or maybe a small spacer under the barrels, or......
Gotta stop thinking about that or it'll do my head in.
PS. welcome to the forum mate.
Cheers, Scott.
KR250 Tandem Twin (Naked)
KR1 Red/White
KR1S Track Bike (has been put on hold for now)
ZXR750 H1 (Winter project)
KR1 Red/White
KR1S Track Bike (has been put on hold for now)
ZXR750 H1 (Winter project)
-
- Premix Junkie
- Posts: 1305
- Joined: Wed Jul 26, 2006 8:49 am
- Location: Waikato, New Zealand
-
- Heavy Smoker
- Posts: 437
- Joined: Tue Oct 02, 2007 10:28 am
d
Yum....bo...
Very Nice....
Love the Racer look...
And you have a graham file Lump..
any pics of the engine and carbs please..
i like to see craftmans work...
what airbox are you running
love the dynomags..and the tzzrr arm
very interesting front end..
it's great to see a finished one..
Good on you..Chap...
- scooble
- Premix Junkie
- Posts: 1549
- Joined: Thu Jul 27, 2006 12:47 pm
- Location: West Sussex
- Contact: