My 2 new bikes!

The place to put pictures of your pride and joy - you can also post pics of your KR if you want!
kesson
Newbie
Posts: 18
Joined: Tue Aug 23, 2016 4:48 pm
Location: SWEDEN

Re: My 2 new bikes!

Post by kesson » Tue Apr 18, 2017 9:53 pm

I have done one short movie on my Race fairing.

https://www.youtube.com/watch?v=o7vX70DZES0

I paint it nearly like the orginal. its not mint !
It was fun to paint but not easy!

//Kesson
RS 250 -02. R6-01. 2*KR1S-90. Rotax max DD2 -16.

kesson
Newbie
Posts: 18
Joined: Tue Aug 23, 2016 4:48 pm
Location: SWEDEN

Re: My 2 new bikes!

Post by kesson » Mon Apr 24, 2017 9:05 pm

Hi !

I have get al fairing monted on my kr1s today so i was going to take it for a run, its could be fun i think.But when i was try to start it up i broke the kickstarteraxle :(
Is the kickstarter axle some weck pointe att the kr1s?

Sorry for my spelling. Best regards kesson.
RS 250 -02. R6-01. 2*KR1S-90. Rotax max DD2 -16.

c&c
Smoker
Posts: 67
Joined: Sat Mar 26, 2011 12:18 am
Location: Rep of Ireland

Re: My 2 new bikes!

Post by c&c » Fri Jun 23, 2017 11:09 pm

kesson wrote:
Tue Nov 08, 2016 10:30 pm
Thanks for all nice words.

I love this bikes and the sound of the engine, i have load up one litle
movie on youtube.

https://www.youtube.com/watch?v=TiJC_oSO3w0

I think the engine are going to leane at the lower rpm it dont answer
direct on the throtle.I going to take a look at the jet in the carburater
now when the winter are on the way to sweden.

Best regards kesson.
The revs are not dropping quick enough on that bike..
Your life style determines your death style

User avatar
Binetta Steve
Oil Injector
Posts: 764
Joined: Sat Nov 10, 2012 6:13 pm
Location: Lancashire

Re: My 2 new bikes!

Post by Binetta Steve » Sat Jun 24, 2017 1:15 pm

Sounds like air screw issue, see Bernies advice here

Post by 500bernie » Sun May 14, 2017 8:30 am

Hi the revs hanging is down to your air screw settings, the bike is too lean. Your air screws need turning in a little more. Loads of posts here on the forum about this topic, the manual setting of 1 1/2 turns out is way too lean, start at 3/4 turns out (you will see some posts where they are only 1/4 turn out).
Good luck.
Bernie :)

kesson
Newbie
Posts: 18
Joined: Tue Aug 23, 2016 4:48 pm
Location: SWEDEN

Re: My 2 new bikes!

Post by kesson » Sat Jul 01, 2017 4:02 pm

Hi !

I havent fixed the bike, i stamp of the startpedal/kickstarter ! I have one kit jetings and needled for the carburates that i going to mount when i have vacassion this month. Then i going to set the air screw as Bernie advise.

Best regards kesson (sorry for my speling)
RS 250 -02. R6-01. 2*KR1S-90. Rotax max DD2 -16.

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest