35mm Carb holder rubbers manufacture - Reed side

Twangled your powervalve grommit in your woodruff key? ask someone how to fix it here
User avatar
tescr500
Oil Injector
Posts: 740
Joined: Sat Aug 29, 2009 12:05 pm
Location: hampshire

Post by tescr500 » Sun Oct 18, 2009 1:58 pm

Hi i'll be interested probably a couple of pairs, could you give me a ruff price cheers wayne.

edgar90
Light Smoker
Posts: 43
Joined: Wed Jun 10, 2009 3:34 am
Location: guadalajara,mexico

Post by edgar90 » Sun Oct 18, 2009 4:26 pm

hi,im interested too,depending on price i want two pairs.

and could you send them to mexico?my zip is 44600 cheers

edgar

dirk
Heavy Smoker
Posts: 324
Joined: Mon Jul 30, 2007 8:18 pm
Location: Germany

Post by dirk » Sat Oct 24, 2009 8:48 pm

also interested. 8)

regards
Dirk
KR-1S 1990
RG500 1987
RGV 250 1992
TZR250 (2MA) 1987

User avatar
KR-1R
Premix Junkie
Posts: 1305
Joined: Wed May 16, 2007 2:24 am

35mm Stage 2.2

Post by KR-1R » Thu Nov 05, 2009 8:03 pm

STAGE 2.2
Image

a test part has been de-molded.
test piece cast without aluminium flange plate embedded and material is softer compound than will be eventually used.
fit and detail are very good (even though surface finish appears a bit rough, material consistency is uniform)

Image
.
.

STAGE 2.3 20 November
first pair reproduced...
Image
Image
Last edited by KR-1R on Sat Nov 21, 2009 10:49 pm, edited 4 times in total.

User avatar
Tripitaka
Heavy Smoker
Posts: 197
Joined: Sun Mar 15, 2009 10:31 pm
Location: Herefordshire

Post by Tripitaka » Thu Nov 19, 2009 6:11 pm

I am also interested, depending on price.
If you have a Parking Ticket or Speeding Ticket take a look at PePiPoo. Helping the Motorist get Justice.

User avatar
KR-1R
Premix Junkie
Posts: 1305
Joined: Wed May 16, 2007 2:24 am

airbox rubbers for 35mm PWK

Post by KR-1R » Wed Nov 25, 2009 10:45 pm

STAGE 3.1 - Airbox Rubbers for PWK 35

Image
there isnt a specific left or right version - A left one is rotated 180° to become a rightside rubber
=D> successfully reproduced :D
Last edited by KR-1R on Wed Nov 25, 2009 11:02 pm, edited 1 time in total.

User avatar
Charles
Premix Junkie
Posts: 1807
Joined: Tue Jun 26, 2007 3:59 pm
Location: Fourques, France

Post by Charles » Wed Nov 25, 2009 10:47 pm

:shock: :shock: great!! =D> =D> =D>

User avatar
ScottaKR
Premix Junkie
Posts: 1523
Joined: Fri Aug 10, 2007 2:52 pm
Location: Australia

Post by ScottaKR » Thu Nov 26, 2009 7:05 am

Awsome work mate. =D> =D> =D> =D>
Do we have any prices yet?
KR250 Tandem Twin (Naked) :mrgreen:
KR1 Red/White
KR1S Track Bike (has been put on hold for now)
ZXR750 H1 (Winter project)

User avatar
kwackman12
Oil Injector
Posts: 926
Joined: Wed Jul 04, 2007 10:06 pm
Location: Reading

Post by kwackman12 » Mon Nov 30, 2009 8:53 pm

Any idea on time scales when they will be ready?
KR1 race bike
ZXR 400 Race Bike
Aprilia RS250

User avatar
KR-1R
Premix Junkie
Posts: 1305
Joined: Wed May 16, 2007 2:24 am

Post by KR-1R » Mon Nov 30, 2009 9:20 pm

might have to look at a ballot system,
given the demand and the effort to required (Steve) to produce them :oops:
the first 10 sets may ship this year - remember some countries cant guaranttee christmas delivery after about 5 December.

there are a few extras I want to be able to do:
get some bulk gaskets cut - should be a quick and easy job for a local printer to lasercut some Klinger or Garlock material - often you can tear the reed gasket in separating the rubber and reed from crankcase - and the new 35 rubber will require its own one.

got some people pricing the KX/KDX clamps for reed and airbox - looks like sourcing from the US will be cheapest - maybe I dont supply (was an addon price) - just thought it would be handy to provide as much as possible

you guys are still gonna have to sort your cables and modifying your reed box stuffer yourselves, FUEL TAP !(enlarge your airbox holes? - I will provide dimensions NOT REQUIRED) - but thats half the fun - doing some mods yourself
Last edited by KR-1R on Thu Dec 10, 2009 12:17 am, edited 2 times in total.

User avatar
mj43
Premix Junkie
Posts: 1327
Joined: Tue Jul 25, 2006 7:44 pm
Location: Middle England

Post by mj43 » Mon Nov 30, 2009 9:42 pm

'...enlarge your airbox holes...' ?
Which holes did you mean as KR-1R rubbers fit a stock KR-1S airbox (at least mine do)

I can measure up a stock KR-1R throttle cable if that helps. Should be plenty of companies that can make cables to suit.

Mod to stock KR-1S stuffer http://myweb.tiscali.co.uk/teamsparrow/kr1stune6.htm plus some info on the jetting I use.

Left is modded. Right is stock with green showing amount that needs removing. Stuffer filled with filler as you grind through the wall.

Image

Didn't realise but that picture is at least 7 years old :shock:
Last edited by mj43 on Mon Nov 30, 2009 9:44 pm, edited 2 times in total.

User avatar
kwackman12
Oil Injector
Posts: 926
Joined: Wed Jul 04, 2007 10:06 pm
Location: Reading

Post by kwackman12 » Mon Nov 30, 2009 9:42 pm

Great news =D> I have a engine with Graham File atm & being able to fit a set of 35mm's would be the icing on the cake :mrgreen:
KR1 race bike
ZXR 400 Race Bike
Aprilia RS250

User avatar
KR-1R
Premix Junkie
Posts: 1305
Joined: Wed May 16, 2007 2:24 am

Post by KR-1R » Mon Nov 30, 2009 9:53 pm

at least 35mm (PWK28) versus 59mm (PWK35) at airbox side??
but have never bothered to compare airboxes side by side
I just assumed bigger
Image

I THINK YOU ARE CORRECT, MARK, the 28 rubber just has a much larger bulkhead flange (maybe 10mm difference on radius) at the airbox wall :oops: :oops: :oops: :oops: so same hole
theyre both a bugger to fit sometimes

the motionpro cable (Taiwan?) that comes with the banshee kit seems correct for length but the screw into the throttle grip is like 10mm vs KR 8mm? and of course has no oil injection take off.
Charles was looking at who can remake
Motionpro in US claim to do a custom service
http://www.motionpro.com/custom/index.php

modifying the existing cable (calling ELF? Satarn?) less effort

User avatar
KR-1R
Premix Junkie
Posts: 1305
Joined: Wed May 16, 2007 2:24 am

Post by KR-1R » Thu Dec 03, 2009 12:52 am

STAGE 4.1 GASKETS

Image

Vsited local printer/signwriter to see how laser cutting gaskets would turn out (probably overall works out 50% cheaper than stock)

ooops dont assume exporting out of one program into another maintains correct scale dimensions....

....worlds smallest KIPS chamber gasket :oops:

User avatar
KR-1R
Premix Junkie
Posts: 1305
Joined: Wed May 16, 2007 2:24 am

Post by KR-1R » Wed Dec 09, 2009 1:59 am

CHA...CHING

...the sound of money vaporised into rubberised laser dust


Image

WONT NEED TO BUY ANY BASE GASKETS FOR A WHILE :wink:

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest