barrel platers recommendations please
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
barrel platers recommendations please
i can supply plain ,de studded ,blasted ,de greased barrels
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: barrel platers recommendations please
There are only really two Fred
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
Re: barrel platers recommendations please
I will chat with both. See if they do a bulk discount.
-
- Heavy Smoker
- Posts: 420
- Joined: Fri Sep 19, 2014 6:44 pm
- Location: South Manchester
Re: barrel platers recommendations please
I used TTW for ceramic plating. He gets a good trade discount, as he sends in batches, and then passes this saving on to customers. It's cheaper using TTW than going direct.
https://poetonaptec.co.uk/
http://www.thetuningworks.co.uk/store/p ... cts_id=708
https://poetonaptec.co.uk/
http://www.thetuningworks.co.uk/store/p ... cts_id=708
Last edited by mellorp on Sat Mar 02, 2019 3:29 pm, edited 1 time in total.
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: barrel platers recommendations please
I have heard that too
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
Re: barrel platers recommendations please
Thanks. That info is good to know
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
Re: barrel platers recommendations please
I've had a set done by Langcourts and a set Aptec coated. The finish on the Aptec barrels was definitely better. The Langcourts barrels were perfectly useable but had pits in several places, they came back with a note stating that it was normal and I didn't worry about it, but the Aptec cylinders looked perfect out the box.
-
- Premix Junkie
- Posts: 1587
- Joined: Wed May 16, 2007 2:24 am