two stroke oil pump

Twangled your powervalve grommit in your woodruff key? ask someone how to fix it here
Post Reply
waza1972
Light Smoker
Posts: 39
Joined: Sun Apr 19, 2015 9:33 pm

two stroke oil pump

Post by waza1972 »

KR1 "89" Ello all, is there a way to bleed the the pump
and how do I know its setup correctly?
User avatar
500bernie
Avgas Sniffer
Posts: 3396
Joined: Mon Aug 02, 2010 10:22 am
Location: Teesside

Re: two stroke oil pump

Post by 500bernie »

Bleed screw is located on the top of the oil pump.
I stuck a bit of premix in a temp tank and ran the bike on tickover until the oil ran free from the pump bleed screw, tightened it up and held the pump on full until the air bubbles disappeared from the oil lines.
Make sure when you synchronise your carbs, that you check the oil pump mark lines up when you are finished.
Cheers
Bernie
Firecracker Red and Grey C3 300
waza1972
Light Smoker
Posts: 39
Joined: Sun Apr 19, 2015 9:33 pm

Re: two stroke oil pump

Post by waza1972 »

Cheers Bernie, will check this the weekend.
Im going to try and get hold of a Haynes
Manual or same as to help me out a bit. Cheers, Waza.
User avatar
Binetta Steve
Oil Injector
Posts: 949
Joined: Sat Nov 10, 2012 6:13 pm
Location: North Wales

Re: two stroke oil pump

Post by Binetta Steve »

No need for a Haynes manual go up to the board index top left on this page. Then krkive , wow what a resource.

This link may also get you there , steve


viewtopic.php?f=22&t=817
waza1972
Light Smoker
Posts: 39
Joined: Sun Apr 19, 2015 9:33 pm

Re: two stroke oil pump

Post by waza1972 »

Xlent, will do. Cheers.
Post Reply