need clutch springs ,92081-1821 and plates

The place to talk about your Tandem!
Post Reply
pepsi
Heavy Smoker
Posts: 410
Joined: Thu Jun 21, 2007 6:58 am
Location: usa

need clutch springs ,92081-1821 and plates

Post by pepsi »

Found the plates, but the springs are hard to find ,found these, but they are gonna cost a lot :shock: , are there any other springs I could use?


http://www.ebay.com/itm/232195589212?_t ... EBIDX%3AIT
Gerrit
Heavy Smoker
Posts: 474
Joined: Fri Jun 26, 2009 12:09 am
Location: Kingdom of the Netherlands

Re: need clutch springs ,92081-1821 and plates

Post by Gerrit »

Found this, there may be other suppiers:

http://www.ebay.co.uk/itm/KAWASAKI-KR-2 ... Sw3mpXGkNT
"Mine is a long and sad tale", said the mouse.
"Indeed it is", said Alice, looking at the mouse's tail.
User avatar
JanBros
Avgas Sniffer
Posts: 3306
Joined: Wed Jul 26, 2006 11:50 pm
Location: the land of Francorchamps

Re: need clutch springs ,92081-1821 and plates

Post by JanBros »

a spring is what it is : just a spring.
any spring with the correct length and diameter can do the job, there is only one type of ordinary "spring-steel". it's strength is solely determined by the thickness f the metal, the number of windings and the diameter of the entire spring. so just look for any springs that correspond or deviate not too much (and to be on the safe side, deviate tougher).

less windings (for the same total length) , thicker metal or smaller diameter stiffen the spring.
My ultimate goal is to die young as late as possible !
pepsi
Heavy Smoker
Posts: 410
Joined: Thu Jun 21, 2007 6:58 am
Location: usa

Re: need clutch springs ,92081-1821 and plates

Post by pepsi »

any spring with the correct length and diameter can do the job, ....
yep, I agree , the trouble is finding that spring, the listings do not give dimensions, and I don't have piles of new different springs to compare to the correct stock unworn length. I cannot find any clutch spring dimension charts either. :(
StrokerBoy
Premix Junkie
Posts: 1087
Joined: Thu Jul 27, 2006 9:43 am
Location: Yorkshire
Contact:

Re: need clutch springs ,92081-1821 and plates

Post by StrokerBoy »

Loads of people advertising KR250A clutch springs on Ebay (UK), I've not tried any of them though.
Kawasaki KR250 Tandem Twin (x4) & KS-II 80,
Yamaha RD350LC,
Suzuki GSX-R750RK & RB50 Gag.
pepsi
Heavy Smoker
Posts: 410
Joined: Thu Jun 21, 2007 6:58 am
Location: usa

Re: need clutch springs ,92081-1821 and plates

Post by pepsi »

StrokerBoy wrote:Loads of people advertising KR250A clutch springs on Ebay (UK), I've not tried any of them though.
most don't ship to the USA :| I am going to try to get some EBC springs here but I gotta figure out why there are two numbers for apparently the same spring, CSK010 and CSK10, as I can only find the CSK10 ones sold over here. FYI,it seems that KR1S's use the same springs.
pepsi
Heavy Smoker
Posts: 410
Joined: Thu Jun 21, 2007 6:58 am
Location: usa

Re: need clutch springs ,92081-1821 and plates

Post by pepsi »

I called EBC and they said the two numbers are the same springs so I ordered the ones available over here CSK10. :D I have a set of OEM plates and EBC springs coming =D>
Post Reply