Right indicator does not work!

Dodgy Kips motor? CDI? battery? diode? reg/rect? its all gobbledygook to me but some people understand it ask tham a question here
Post Reply
Peter4180
Newbie
Posts: 17
Joined: Fri Jan 14, 2011 10:48 am
Location: Denmark

Right indicator does not work!

Post by Peter4180 »

After putting my KR1-S together the indicator to the right side does not work. To the left everything works fine but to the right only the rear lights up but not flashing and no light in the front indicator.
If I change the wiring in front connecting the right indicator to the left's wiring - it works...

Advice needed???
User avatar
JanBros
Avgas Sniffer
Posts: 3306
Joined: Wed Jul 26, 2006 11:50 pm
Location: the land of Francorchamps

Post by JanBros »

you'll have a broken wire in the front right indicator circuit. time to dig out the wiring diagram and your resistance measuring device (hou you call a multi-meter in english ?) and dig in :wink:
My ultimate goal is to die young as late as possible !
Peter4180
Newbie
Posts: 17
Joined: Fri Jan 14, 2011 10:48 am
Location: Denmark

Post by Peter4180 »

Thank you - had hoped for some magical words... Will have to dig in....
Very much appreciated
Peter
User avatar
JanBros
Avgas Sniffer
Posts: 3306
Joined: Wed Jul 26, 2006 11:50 pm
Location: the land of Francorchamps

Post by JanBros »

easiest thing to do first is check that 12V arrives at the indicator, and take a wire and connect the "-" from the indicator to the chassis/battery minus :wink:
My ultimate goal is to die young as late as possible !
Post Reply