Page 1 of 1

Zeeltronic PCDI-10VT - No spark!!!!?

Posted: Fri Jul 05, 2019 10:51 pm
by Woodsy
Evening Folks!

I’m in need of the collective’s wisdom about why my Zeeltronic PCDI-10VT isn’t giving me a spark. I get a nice tight blue spark with the stock CDI, but plugging in they Zeeltronic gets nothing! 🧐

Please, any help / suggestions greatly appreciated 👍

Cheers,

Al

Re: Zeeltronic PCDI-10VT - No spark!!!!?

Posted: Sat Jul 06, 2019 8:07 am
by KR-1R
.
maccas wrote: Sun Oct 30, 2011 12:19 pm Problem sorted!

Wiring diagram had a slight error in it, black/white wire was connected to brown/white on kr loom and it wasnt supposed to be connected to anything.

Black/white is optional kill switch wire so was earthing spark straight to ground.

Pulled black/white wire out and went first kick.

Just need to commision it now, but no time today :-(

Must say exhaust note has a definitive crack to it now as lozza has always said, idles much better too!

Maccas

.
http://kr-1s.co.uk/forum/viewtopic.php? ... ilit=brown
.
.

Re: Zeeltronic PCDI-10VT - No spark!!!!?

Posted: Sat Jul 06, 2019 10:42 am
by Woodsy
Thanks KR1R-I’d seen that thread, but it was related tot the -V, not the -VT, and they’ve got differing wiring diagrams hence my plea for help!