Page 1 of 1

what am i missing here please

Posted: Sat Jun 29, 2013 12:47 pm
by KR1S
ok purchased this roller and remove the tank and some electrical parts are missing

is anyone able to let me know whats missing and where it would plug into please

cheers in advance

Re: what am i missing here please

Posted: Sat Jun 29, 2013 9:24 pm
by kghost
Hello from the Gold Coast.

I'm having somewhat of the same problem. Reviving one fron the dead.

In the top right corner:

The big plug and little plug are where the stator and ignitin pulser plug in.

They are on the engine.

Looks like the KIPS motor is missing from the middle.

Re: what am i missing here please

Posted: Sat Jun 29, 2013 11:05 pm
by KR1S
correct bring back from the dead

thanks for that as thats have the puzzle solved

just made the pic a bit bigger

ok so have to track down this kips motor - suppose thats will bi a bit hard to find?

Re: what am i missing here please

Posted: Sat Jun 29, 2013 11:55 pm
by 500bernie
The kips servo motors are always available here on the forum and ebay.
Just place a request in the wanted section.

Re: what am i missing here please

Posted: Sun Jun 30, 2013 2:04 am
by kghost
Now that the picture is a little bigger.....it might be hanging there next to the throttle cables...can't tell.

Re: what am i missing here please

Posted: Sun Jun 30, 2013 5:19 am
by KR1S
i will getter a better picture today

i am glad the KR community is very helpful with parts

i am in oz so something i ve experienced freight out the uk not cheap

Re: what am i missing here please

Posted: Sun Jun 30, 2013 6:28 am
by kghost
KR1S wrote:
i am in oz so something i ve experienced freight out the uk not cheap
It's cheaper and faster than the USA.

The majority of members here are from the uk and very helpful.

There are still parts available around Oz.

Sadly.....not much in the way of bodywork.

James P and I are also in Oz.

Re: what am i missing here please

Posted: Sun Jun 30, 2013 1:28 pm
by KR1S
good to here this forum is friendly

attached a better photo

as you can see 4 plugs
large 6 pins

small 2 pins

small 3 pins

smaller 2 pins

Re: what am i missing here please

Posted: Sun Jun 30, 2013 10:24 pm
by kghost
6 pin is to the stator (think alternator) attached to the engine crank.

The 3 and 2 pin is to the kips motor.

Can't see the other one.

Re: what am i missing here please

Posted: Mon Jul 01, 2013 8:17 am
by martin
pick up coil

Re: what am i missing here please

Posted: Mon Jul 01, 2013 10:18 pm
by kghost
martin wrote:pick up coil
Yup the ignition pickup off the crank of the engine

Re: what am i missing here please

Posted: Tue Jul 02, 2013 6:38 am
by KR1S
thx guys for your effort and help to a stranger

Re: what am i missing here please

Posted: Tue Aug 13, 2013 11:41 pm
by Professor
Your also missing an engine! :roll:

Download the manual and have a look at the electrical chapter, its on this forum I think

what am i missing here please

Posted: Fri Dec 12, 2014 5:27 am
by MichaelTage
Hi Renee How are you?

What about noise with just the accordian style door. Would the classes be separate from your husbands appointment times?

And what about parking?