what am i missing here please

Dodgy Kips motor? CDI? battery? diode? reg/rect? its all gobbledygook to me but some people understand it ask tham a question here
Post Reply
KR1S
Newbie
Posts: 17
Joined: Fri Jun 28, 2013 3:24 pm
Location: Perth, West Coast, Australia

what am i missing here please

Post by KR1S » Sat Jun 29, 2013 12:47 pm

ok purchased this roller and remove the tank and some electrical parts are missing

is anyone able to let me know whats missing and where it would plug into please

cheers in advance
You do not have the required permissions to view the files attached to this post.
Last edited by KR1S on Sat Jun 29, 2013 11:01 pm, edited 1 time in total.

kghost
Heavy Smoker
Posts: 128
Joined: Thu Jun 06, 2013 10:32 am
Location: Australia

Re: what am i missing here please

Post by kghost » Sat Jun 29, 2013 9:24 pm

Hello from the Gold Coast.

I'm having somewhat of the same problem. Reviving one fron the dead.

In the top right corner:

The big plug and little plug are where the stator and ignitin pulser plug in.

They are on the engine.

Looks like the KIPS motor is missing from the middle.

KR1S
Newbie
Posts: 17
Joined: Fri Jun 28, 2013 3:24 pm
Location: Perth, West Coast, Australia

Re: what am i missing here please

Post by KR1S » Sat Jun 29, 2013 11:05 pm

correct bring back from the dead

thanks for that as thats have the puzzle solved

just made the pic a bit bigger

ok so have to track down this kips motor - suppose thats will bi a bit hard to find?

User avatar
500bernie
Avgas Sniffer
Posts: 3300
Joined: Mon Aug 02, 2010 10:22 am
Location: Teesside

Re: what am i missing here please

Post by 500bernie » Sat Jun 29, 2013 11:55 pm

The kips servo motors are always available here on the forum and ebay.
Just place a request in the wanted section.
Firecracker Red and Grey C3 300

kghost
Heavy Smoker
Posts: 128
Joined: Thu Jun 06, 2013 10:32 am
Location: Australia

Re: what am i missing here please

Post by kghost » Sun Jun 30, 2013 2:04 am

Now that the picture is a little bigger.....it might be hanging there next to the throttle cables...can't tell.

KR1S
Newbie
Posts: 17
Joined: Fri Jun 28, 2013 3:24 pm
Location: Perth, West Coast, Australia

Re: what am i missing here please

Post by KR1S » Sun Jun 30, 2013 5:19 am

i will getter a better picture today

i am glad the KR community is very helpful with parts

i am in oz so something i ve experienced freight out the uk not cheap

kghost
Heavy Smoker
Posts: 128
Joined: Thu Jun 06, 2013 10:32 am
Location: Australia

Re: what am i missing here please

Post by kghost » Sun Jun 30, 2013 6:28 am

KR1S wrote:
i am in oz so something i ve experienced freight out the uk not cheap
It's cheaper and faster than the USA.

The majority of members here are from the uk and very helpful.

There are still parts available around Oz.

Sadly.....not much in the way of bodywork.

James P and I are also in Oz.

KR1S
Newbie
Posts: 17
Joined: Fri Jun 28, 2013 3:24 pm
Location: Perth, West Coast, Australia

Re: what am i missing here please

Post by KR1S » Sun Jun 30, 2013 1:28 pm

good to here this forum is friendly

attached a better photo

as you can see 4 plugs
large 6 pins

small 2 pins

small 3 pins

smaller 2 pins
You do not have the required permissions to view the files attached to this post.

kghost
Heavy Smoker
Posts: 128
Joined: Thu Jun 06, 2013 10:32 am
Location: Australia

Re: what am i missing here please

Post by kghost » Sun Jun 30, 2013 10:24 pm

6 pin is to the stator (think alternator) attached to the engine crank.

The 3 and 2 pin is to the kips motor.

Can't see the other one.

User avatar
martin
Premix Junkie
Posts: 1598
Joined: Sat Jan 13, 2007 10:35 pm
Location: luton,beds

Re: what am i missing here please

Post by martin » Mon Jul 01, 2013 8:17 am

pick up coil
current bikes
fully restored green/white kr1 b2

kghost
Heavy Smoker
Posts: 128
Joined: Thu Jun 06, 2013 10:32 am
Location: Australia

Re: what am i missing here please

Post by kghost » Mon Jul 01, 2013 10:18 pm

martin wrote:pick up coil
Yup the ignition pickup off the crank of the engine

KR1S
Newbie
Posts: 17
Joined: Fri Jun 28, 2013 3:24 pm
Location: Perth, West Coast, Australia

Re: what am i missing here please

Post by KR1S » Tue Jul 02, 2013 6:38 am

thx guys for your effort and help to a stranger

Professor
Heavy Smoker
Posts: 145
Joined: Mon Nov 20, 2006 9:23 pm
Location: Cornwall

Re: what am i missing here please

Post by Professor » Tue Aug 13, 2013 11:41 pm

Your also missing an engine! :roll:

Download the manual and have a look at the electrical chapter, its on this forum I think
Hardcore you know the score

MichaelTage

what am i missing here please

Post by MichaelTage » Fri Dec 12, 2014 5:27 am

Hi Renee How are you?

What about noise with just the accordian style door. Would the classes be separate from your husbands appointment times?

And what about parking?

Post Reply