ZXR400L discs warped
- scooble
- Premix Junkie
- Posts: 1549
- Joined: Thu Jul 27, 2006 12:47 pm
- Location: West Sussex
- Contact:
ZXR400L discs warped
after my last track day, my discs have become warped.
I did manage to pick up a NOS prolite discs on ebay a few months back, but the centers don't match (holes don't line up).
Would it either be possible to manufacture new centeres for the prolites
or
straighten the warped discs?
any suggestions would be appreciated
I did manage to pick up a NOS prolite discs on ebay a few months back, but the centers don't match (holes don't line up).
Would it either be possible to manufacture new centeres for the prolites
or
straighten the warped discs?
any suggestions would be appreciated
- mr_bungholeo
- Premix Junkie
- Posts: 1225
- Joined: Wed Mar 21, 2007 7:55 pm
- Location: braintree
- scooble
- Premix Junkie
- Posts: 1549
- Joined: Thu Jul 27, 2006 12:47 pm
- Location: West Sussex
- Contact:
spoke to a few people about warped discs and was told that if they warp through heavy use, then they are likely to warp again if straightened
however, the good news is, i spoke to my machienist and he is going to mod the prolites to make them fit
cheaper than a new set of discs!
Got my shock back from mick gardner this week too. (shortened, re-valved and re-sprung) ...it came with a brand new ohlins spring fitted to.....woo hoo, two new bits of bling!
however, the good news is, i spoke to my machienist and he is going to mod the prolites to make them fit
cheaper than a new set of discs!
Got my shock back from mick gardner this week too. (shortened, re-valved and re-sprung) ...it came with a brand new ohlins spring fitted to.....woo hoo, two new bits of bling!
- kwackman12
- Oil Injector
- Posts: 924
- Joined: Wed Jul 04, 2007 10:06 pm
- Location: Reading
Iv'e warped two sets on my kr after trackdays, somebody told me it usualy happens when the bike is parked up & the discs/pads remain in the same spot & are still hot? (between sesions) they sugested moving the bike around until they have cooled down.
Just brought a set of PFM discs hopefully these wont go the same way [-o<
My daughter has a set of "zxr 400 L model" discs (210mm) nice condition original Kawasaki with black centres, these are a spare set as she has also fitted a set of PFM discs to her bike & has another set of discs on wets
she wants £60.00 including postage if you need them
Gary
Just brought a set of PFM discs hopefully these wont go the same way [-o<
My daughter has a set of "zxr 400 L model" discs (210mm) nice condition original Kawasaki with black centres, these are a spare set as she has also fitted a set of PFM discs to her bike & has another set of discs on wets
she wants £60.00 including postage if you need them
Gary
KR1 race bike
ZXR 400 Race Bike
Aprilia RS250
ZXR 400 Race Bike
Aprilia RS250
- scooble
- Premix Junkie
- Posts: 1549
- Joined: Thu Jul 27, 2006 12:47 pm
- Location: West Sussex
- Contact:
- mr_bungholeo
- Premix Junkie
- Posts: 1225
- Joined: Wed Mar 21, 2007 7:55 pm
- Location: braintree
id be interested in them scoobie...warped my set on the road ....but they passed the mot...lucky me...scooble wrote:thanks for the offer and I will bare that in mind, however, I'll see how I get on with the Pro-lites first.
Incidentally, I have a set of 300mm discs too if anyone is interested (which I bought by mistake thinking I had 'H' forks and calipers)
bring a ding ding i'm a throttle happy chappy...
you cant beat a bit of blue haze...
danny harris.....R.I.P
gone but totally forgotten...
you cant beat a bit of blue haze...
danny harris.....R.I.P
gone but totally forgotten...
- scooble
- Premix Junkie
- Posts: 1549
- Joined: Thu Jul 27, 2006 12:47 pm
- Location: West Sussex
- Contact:
- mr_bungholeo
- Premix Junkie
- Posts: 1225
- Joined: Wed Mar 21, 2007 7:55 pm
- Location: braintree
-
- Premix Junkie
- Posts: 1587
- Joined: Wed May 16, 2007 2:24 am
Brake rotors, carriers and buttons
Spiegler do replacement parts such as carriers, rotors and buttons/rivets
ductile iron race rotors... [img]htt ... /company
ductile iron race rotors... [img]htt ... /company
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: Brake rotors, carriers and buttons
but I'm pretty sure not for OEM-discsKR-1R wrote:Spiegler do replacement parts such as carriers, rotors and buttons/rivets
[url]
many after market disc manufacterers make them (like Beringer), but they are different sizes
My ultimate goal is to die young as late as possible !
-
- Premix Junkie
- Posts: 1587
- Joined: Wed May 16, 2007 2:24 am
warped disks
in any case warped disks are probably junk - my YZF has a warped OEM pair and yes theyll get a WOF no problem but after two hard slow downs from above 160kph braking from then on is ridiculous - sooo much juddering back through the brake lever - almost unusable until they cool down
invest, get some new ones - good brakes are the best performance mod for your dollar
invest, get some new ones - good brakes are the best performance mod for your dollar