KR1S CALIPER PISTONS ,WHAT CAN YOU USE TO REBUILD THE CRUMBLING RED OR BLACK STUFF IN END

Braking issues
Post Reply
bsa70
Light Smoker
Posts: 40
Joined: Sat Sep 28, 2013 1:17 pm
Location: hastings

KR1S CALIPER PISTONS ,WHAT CAN YOU USE TO REBUILD THE CRUMBLING RED OR BLACK STUFF IN END

Post by bsa70 »

KR1S CALIPER PISTONS ,WHAT CAN YOU USE TO REBUILD THE CRUMBLING RED OR BLACK STUFF IN END ,THAT WITH STANDS HEAT AND PRESSURE WOULD FIBREGLASS PASTE DO ? ANY IDEAS LADS CHEERS, 8) :idea:
bsa70
Light Smoker
Posts: 40
Joined: Sat Sep 28, 2013 1:17 pm
Location: hastings

Re: KR1S CALIPER PISTONS ,WHAT CAN YOU USE TO REBUILD THE CRUMBLING RED OR BLACK STUFF IN END

Post by bsa70 »

i think jb weld high temp and psi strength might do,if any one tries it, let me know the outcome thanks.
headcoats
Avgas Sniffer
Posts: 2120
Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country

Re: KR1S CALIPER PISTONS ,WHAT CAN YOU USE TO REBUILD THE CRUMBLING RED OR BLACK STUFF IN END

Post by headcoats »

A lot of brakes don't have anything in the end at all
Can it yer old boiler
Post Reply