Page 1 of 1
Front master cylinder
Posted: Sat Feb 08, 2014 1:55 am
by nikfubar
Could someone please tell me the bore size of the KR1s master cylinder as I'm fitting a KR1s front & rear end to my KH hybrid & need to get the correct size master, I have a 5/8" one, hope that's the right size.
Thanks
Re: Front master cylinder
Posted: Sat Feb 08, 2014 8:36 am
by 500bernie
Hi Nic,
No idea as I have not seen mine for a couple of years
But I would love to see some photos of your hybrid [-o<
I would like to see a KR1-S with a kawasaki triple motor in it, nothing sounds like a kawasaki triple
Re: Front master cylinder
Posted: Sat Feb 08, 2014 12:07 pm
by nikfubar
Hi Bernie
It's not quite like that
it's a KH350 with KR1s running gear, here's the mock up for making the pipes
Here's how far I've got with putting the finished article together.
Re: Front master cylinder
Posted: Sat Feb 08, 2014 12:53 pm
by JanBros
All Kawa's that use those calipers have a 5/8 master cylinder.
Re: Front master cylinder
Posted: Sat Feb 08, 2014 1:07 pm
by 500bernie
Looking nice Nic,
But you need one of these on the back...
Have you mounted the shocker fixing the same way Cabbie did on his KH400 ?
Re: Front master cylinder
Posted: Sat Feb 08, 2014 2:23 pm
by nikfubar
Thanks for confirming cylinder size
Don't know how Cabbie mounted his shock but this is how I did mine.