Page 1 of 1
get your dampers out ;P
Posted: Mon Feb 23, 2015 8:06 pm
by twigg
hey im looking at putting a steering damper on my kr1s project bike i just wondered where about's you mount them and where to get a kit so pictures of your dampers will be appreciated
Re: get your dampers out ;P
Posted: Tue Feb 24, 2015 7:55 pm
by JanBros
Re: get your dampers out ;P
Posted: Tue Feb 24, 2015 8:43 pm
by twigg
cheers for the link
but it doesn't tell me what length the damper has to be and the stroke of the damper i presume it has to have a 41mm clamp made up to attach it to the fork stanchion
Re: get your dampers out ;P
Posted: Thu Feb 26, 2015 4:29 pm
by JanBros
than you didn't follow all the links
it needs to have a minimum stroke of 140mm
Re: get your dampers out ;P
Posted: Thu Feb 26, 2015 7:39 pm
by Luders
Re: get your dampers out ;P
Posted: Thu Feb 26, 2015 9:10 pm
by twigg
ah now i see JanBros thanks for that thats a great help, i will get some pics up when i sort one out
luders i am very envious of your kr1s im loving the colour scheme what front end is in it??
Re: get your dampers out ;P
Posted: Thu Feb 26, 2015 9:20 pm
by Luders
It's off a TZ250 '94
Re: get your dampers out ;P
Posted: Thu Feb 26, 2015 10:51 pm
by twigg
well they look the dogs dingleberrys
were they a hard conversion??
Re: get your dampers out ;P
Posted: Fri Feb 27, 2015 8:29 am
by Luders
Not too bad, but expensive. Spondon adjustable yokes and fork top extenders were used. Then there's the cost of the brakes and forks themselves.
My sponsor has some for sale at the moment.
http://www.geckomotorcycles.co.uk/magen ... forks.html
