Wheel axle Torque Settings

Wheels, shocks, forks, frame
Post Reply
headcoats
Avgas Sniffer
Posts: 2120
Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country

Wheel axle Torque Settings

Post by headcoats »

For KR1S front axle the down load says 80 pounds torque :shock: :shock:

Is this right :?

It says rear is 65 pounds so why is the front that much :?:
Can it yer old boiler
User avatar
JanBros
Avgas Sniffer
Posts: 3306
Joined: Wed Jul 26, 2006 11:50 pm
Location: the land of Francorchamps

Re: Wheel axle Torque Settings

Post by JanBros »

forget those numbers, just do it to whatever you thinck is right.

only bolt's I ever torque are for cylinder heads, cam/cranckshafts and conecting rods.
My ultimate goal is to die young as late as possible !
headcoats
Avgas Sniffer
Posts: 2120
Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country

Re: Wheel axle Torque Settings

Post by headcoats »

I have always done the rear around 55 pounds so shall I go the same on the front :wink:
Can it yer old boiler
Post Reply